Ordered and received fast from amazon. Fair quality, little heavy weight and arms have lots of molding flashing that needs to be trimmed with hobby knife and/or sanded. Also no assembly instructions included but came with screws for frame and motors w allen wrenches. No lock washers included which would be needed or use blue medium locktite. Another thing is mounting points for arms not prescion drilled/molded which causes arms to not line up correctly with opposite arm. Had to file mounting area on arms and slightly re-drill holes for exact fit and alignment. Bottom pcb plate includes built-in power distribution traces, not sure if i will use because of the electrical interference with flight controllers and gps many folks mention on forums. Will update review when get build flying, having to reorder motors since received bad ones ordered thru amazon. Overall not too bad for low priced f450 clone kit.
Ideal kit that assembled simply. Flies fantastic with the naza v2 controller.
Easy to put together, came with m3 screws as well that work for the motors. There not in the discription so it’s an added bonus.
The product is really pleasant and good high quality in contrast to its selling price. The only detail i need to have to say that a single leg of the landing gear does not make contact with to floor and there is a tiny area on truly flat ground. I would give five stars if this is mounted.
Bought it as a backup parts & the price was good value.
I’ve bought two of these and if you’re a starter, you can expect to almost certainly want to invest in two also. I designed my 1st gps drone with this frame and it truly is a very durable frame for a initial time drone make. The landing gear are crap and will crack very conveniently so i just will not even trouble to put them on. I will in all probability be purchasing yet another just one for an additional gps drone build with dji naza technique. Update 09/01/2019i have considering that bought a full of 3 of these kits lol i have two completely crafted and flaying gps drones with this frame. I will list my specs for the two so with any luck , another person could uncover it valuable. Drone #one (with digicam connected)flight controller: airbot omnibus f4 proreceiver: frsky xm+esc: turnigy multisar 30a blheli_s four in 1 escmotors: two racerstar 2212 920kv & 2 turnigy multistar 2212 920kvgemfan 8045 propsbeitian bn-880 gps modulerunning: inav flight2nd drone:flight controller: mateksys f405-stdesc: racerstar rev35 35a blheli_s 3-6s four in 1 escmotors: racerstar racing edition 2212 br2212 980kvreceiver: frsky xm+gemfan 8045 propsbeitian bn-880 gps modulehiletgo hc-06 rs232 four pin wireless bluetooth serial rf transceiver modulerunning ardupilot firmware and qgroundcontrol for android.
YoungRC F450 Drone Frame Kit 4-Axis Airframe 450mm Quadcopter Frame Kit with Landing Skid Gear
- Make sure this fits
by entering your model number.
- ★Ultra high strength material: Built from quality glass fiber and polyamide nylon.It is resistant to falling and impact.
- ★Integrated PCB connections for direct soldering of your ESCs, make your esc,power supply and other wiring more quickly and safely.
- ★Pre-threaded brass sleeves for all of the frame bolts.Colored arms for orientation to keep you flying in the right direction.
- ★Large mounting tabs on main frame bottom plate for easy camera mounting. Easy assembly.
- ★★Instructional video: https://www.youtube.com/watch?v=zgKRQ-jxSUE
Stable frame just requested another a single my son would like to make 1 good selling price to.
Seems to be pretty good so far. This is my first home built drone, but i like it.
Fact you cannot take over the world without a good quality drone. Now i only need 100,000 more of these and im in business. This is a big frame (450mm) and feels sturdy enough. Wont know until the first crash.
Beautifully created, and an remarkable cut price for fewer than $twenty.
Figured i wanted a new major plate and it was less costly to order the complete drone and i will have tons of additional areas as i crash and crack my drone.
This one didn’t have skids with it. Overall good quality profit size.
Actually good for the value, did not bother putting in the landing legs even though.
The frame is pretty good but the landing gear is awful. I bought this frame kit over other ones specifically to have landing gear but they snapped in half with the smallest crash because they’re terribly designed, this is not the fault of the seller, all these f450 stock landing gears will snap, luckily this kit comes at a great price even cheaper than some others so this seller is at least offering a good value even if the stock landing gear is basically worthless. Luckily you can easily build your own landing gear or find some that are 3d printed.
Love the frame, but the plastic landing legs are not really good. Overall a really good product.
The frame is nice a sturdy but i had to bend the pcb boards into place because the holes did not like up otherwise i would be given if a 5 star review.
YoungRC F450 Drone Frame Kit 4-Axis Airframe 450mm Quadcopter Frame Kit with Landing Skid Gear : The bolt-on landing gear is useless – first set broke at the obviously weak first joint immediately, been through no less than a dozen sets since and all broke in the same place eventually. Finally decided to ditch the high gear and have fared better since – two of three frame skids on two different frame have cracked, but frame is still serviceable regardless. My main gripe is that the second frame i ordered is not square/plumb/etc. Only three of the four skids contact the ground at once no matter how hard i try to adjust. This results in a rather unpredictable yawing when in flight that cannot be tuned out. Just ordered my third frame. . Fingers crossed that it is all straight.
Fit, variety and function are enough. It is not large effectiveness but it’s fantastic for the price and incredibly purposeful.
I am in the process of setting up a quadcopter from scratch, including the flight controller. I ordered this airframe based on testimonials from other people. It appears that it will be very ideal for my challenge & the actuality that it consists of a electricity distribution board as aspect of the composition of the quadcopter by itself need to save weight. As before long as i obtain some standoffs, i will commence the assembly.
I obtained this frame to include to my present drone frame for included options. Just know that this frame does not have a superior quantity of mounting holes to healthy some products.
Frame was a minor twisted, (took exertion to place it with each other for the 1st time) but all round it really is a terrific 450mm frame, light-weight and rigid. The landing gear is silly light-weight, i recognize what absolutely everyone implies when they say a soft crash will split the landing gear. Other than that totally worth the $25.
Nice frame, lots of space to mount things. Easy to assemble, just a couple parts. Would be nice if there were holes for the typical 30. 5 fc’s but ended up drilling those to build the esc & fc stack.