WRAPGRADE Poly Skin : Super Easy Install

Definitely have to watch the youtube video for installation techniques. Take your time laying and smoothing the different pieces. I’m over sixty years old, and it was a little difficult for me to line a couple of the pieces up, overall came out pretty clean with very minor aberrations. Any problems with installation were due to me not having as steady of a hand as i used to have. The adhesive allows you to reposition parts if they don’t quite come together, yet when you smooth it out it appears to be quite permanent. I also installed the battery wraps, and it looks great alsovisibility. I bought the super red wrap, hoping i could see the drone a little better at distance. My first flight with the wrap was about an hour and a half before sunset.

It’s quite easy to put on. Covers the original color very well.

As with the skin kit for the batteries, this kit fit well and went on in a short time.

Follow the directions and it goes on perfectly. Looks awesome comes with extra main body piece.

Pleased so far with these mavic air ‘skins’. Went with the blaze orange, and is now much easier to see the small drone when in front of trees. The decals are very accurate and fit perfectly. I’ve only had them on for 1 week, but so far the adhesive is doing well.

This skin was super to install. I dread trying to put on decals or screen protectors; i’m just too ocd. These skins were very forgiving when i misaligned them and pulled them off. I ordered the red to try and keep mavic air the same shade of red it already was. This skin’s shade of red was a great match.

I love the glimpse this camo pattern has. It actually demands to be witnessed to get it. The pattern is derived from the way the texture is laid down in the tpu materiel. I identified with some steady palms and staying in no certain hurry i was capable to get the skin to lay and adhere perfectly. The wrap has even survived a couple of considerably less than stellar flights that ended in trees or the floor.

The skins are slightly way too significant producing overlap. I experienced to minimize with an exacto knife to correct. It would be greater if the wrap ended up a little bit smaller sized causing even gaps then overlap. Excellent of the wrap is a 10.

  • Even an old guy like me can do it!

  • Transformation

  • Highly Visible, accurate cutouts

Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

  • Make sure this fits
    by entering your model number.
  • PERFECT FIT! Unique design pattern without corner gaps.
  • Material does not affect flight performance and radio waves. We use 3M’s finest double cast vinyl – repositionable and bubble free installation.
  • AIRFORCE SILVER is a neutral silver metallic close to duralumin. The silver color is reminiscent of the outer plate of Air Force machines, it shines well in the sky.
  • No need special tools and hair dryer. English instruction manual is attached to the product. A detailed “how to apply” Youtube video is available.
  • All production process – from cut to packaging in Japan

Look good and it went on ok, i was under the impression it came with a controller wrap as will, i guess i was wrong.

This is a great product that i would highly recommend. The instructions are very detailed and it’s fairly easy to install.

Excellent product, easy to apply.

This wraps fits great and looks good.

Wrap goes on incredibly properly and appears to be great. But some persons are just not fantastic with their hands. When i was increasing up all the boys were being into model planes and automobiles. There was was usually one child who’s models appeared terrible for the reason that they just weren’t good with the fingers or tried to hurry matters via. If you’re “that” kid, have a person else wrap your drone for you. I suspect the people right here complaining about bubbles, wrinkles and very poor fit are some of “those” kids.

Outstanding support and solution.

I’ve tried 2 other skin manufacturers, and wrapgrade is the superior product by far. Perfectly cut, good adhesive that you can lift and reapply when installing, and excellent instructions. I know the price may be off putting but it’s worth it.

Best in good shape on the mavic air, and it appears to be like good.

I wanted my drone (the black mavic air) to be easier to spot at distance, and this skin at least partly does the trick. Turned out, install was very easy and i’ve had no trouble hence. My only complaint is that the package does not come with a skin for the battery surface which is the main area (the ‘underbody’) you see when flying.

The fit of this skin is perfect. I love the shine that it gives. The way the pieces overlap to make sure there are no gaps is great. The thickness of this skin will also provide good protection from scratches. Don’t hesitate to purchaseafter a full comparison to the skins from decal girl, i wish i could give this more stars. The design of this is better, even though it covers less surfaces. This skin looks like a color change, more than a decal. This skin is also much thicker than the decalgirl skin.

You definitely need to watch the youtube tutorial for techniques though. The material is pretty good and its thick giving protection against the scratches. This is more of adding color than a decal. It does cover less surface area but i got the unit b for covering the remaining part directly from wrapgrade as it is not sold on amazon.

Was very easy to apply, looks great and stays.

Wrapping it on your personal is a very little tricky just be watchful of the bubbles. I wiped down the drone with alcohol first, then applied a microfiber fabric, and and finally tape to get any debris off.

Experienced it on for many weeks and several flights. Seems like an aftermarket paint coating, if you take your time the skins go on properly and never bubble up. Haven’t started out peeling up at all on the edges.

I got the preadolescent purple and it looks amazing. Be prepared to spend several hours applying these if you want them to look good though. The design around some of the sharper corners could be better. If they left more overlap material there wouldn’t be as much lifting on those edges.

Unique and great excellent.

Easy to follow instructions.

Summary
Review Date
Reviewed Item
Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)
Rating
4.3 / 5  stars, based on  52  reviews

1 Comment

  1. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    Pleased so far with these mavic air “skins”. Went with the blaze orange, and is now much easier to see the small drone when in front of trees. The decals are very accurate and fit perfectly. I’ve only had them on for 1 week, but so far the adhesive is doing well.
  2. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    Pleased so far with these mavic air “skins”. Went with the blaze orange, and is now much easier to see the small drone when in front of trees. The decals are very accurate and fit perfectly. I’ve only had them on for 1 week, but so far the adhesive is doing well.
    1. I love the look this camo pattern has. It really needs to be seen to get it. The pattern is derived from the way the texture is laid down in the tpu materiel. I found with some steady hands and being in no particular hurry i was able to get the skin to lay and adhere well. The wrap has even survived a few less than stellar flights that ended in trees or the ground.
      1. I love the look this camo pattern has. It really needs to be seen to get it. The pattern is derived from the way the texture is laid down in the tpu materiel. I found with some steady hands and being in no particular hurry i was able to get the skin to lay and adhere well. The wrap has even survived a few less than stellar flights that ended in trees or the ground.
  3. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    I was looking for an actual pink drone for my cousin not stickers. I put the search for a pink drone and did not realize it was sticker. If i would have i wouldn’t have ordered them at $16 dollars. The stickers also came in bent. Even trying to straighten them out they will not work.
  4. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    I was looking for an actual pink drone for my cousin not stickers. I put the search for a pink drone and did not realize it was sticker. If i would have i wouldn’t have ordered them at $16 dollars. The stickers also came in bent. Even trying to straighten them out they will not work.
  5. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    Wrap goes on very well and looks great. But some people are just not good with their hands. When i was growing up all the boys were into model planes and cars. There was was always one kid who’s models looked terrible because they just weren’t good with the hands or tried to rush things through. If you’re “that” kid, have someone else wrap your drone for you. I suspect the people here complaining about bubbles, wrinkles and poor fit are some of “those” kids.
  6. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    Wrap goes on very well and looks great. But some people are just not good with their hands. When i was growing up all the boys were into model planes and cars. There was was always one kid who’s models looked terrible because they just weren’t good with the hands or tried to rush things through. If you’re “that” kid, have someone else wrap your drone for you. I suspect the people here complaining about bubbles, wrinkles and poor fit are some of “those” kids.
  7. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    Good luck wrapping your drone without creases, decals are thin and some off easy.
  8. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    Good luck wrapping your drone without creases, decals are thin and some off easy.
    1. The skins are slightly too large causing overlap. I had to cut with an exacto knife to fix. It would be better if the wrap were slightly smaller causing even gaps then overlap. Quality of the wrap is a 10.
      1. The skins are slightly too large causing overlap. I had to cut with an exacto knife to fix. It would be better if the wrap were slightly smaller causing even gaps then overlap. Quality of the wrap is a 10.
  9. The product is hard to use and there is no way to make it perfect. The picture i attached says it all. That is what you will get after about an hour of meticulous work. The material though is very good and not a paper product like other drone skins for sale. Maybe it will work for you but not for me. I revoved it from my macic air and trash.
    1. The product is hard to use and there is no way to make it perfect. The picture i attached says it all. That is what you will get after about an hour of meticulous work. The material though is very good and not a paper product like other drone skins for sale. Maybe it will work for you but not for me. I revoved it from my macic air and trash.
  10. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    I got my mavic air just before elon musk sent his telsa roadster into space, which at the time i wanted a red mavic air but could only get one in black. I recently found this company and after doing careful research i decided to get the japan red skin for my aircraft. I can say i am extremely satisfied with this skin, it creates the perfect red so now i can have my own out of this world “tesla”.
    1. I got my mavic air just before elon musk sent his telsa roadster into space, which at the time i wanted a red mavic air but could only get one in black. I recently found this company and after doing careful research i decided to get the japan red skin for my aircraft. I can say i am extremely satisfied with this skin, it creates the perfect red so now i can have my own out of this world “tesla”.
  11. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    Wrapping it on your own is a little tricky just be careful of the bubbles. I wiped down the drone with alcohol first, then used a microfiber cloth, and lastly tape to take any debris off.
  12. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    Wrapping it on your own is a little tricky just be careful of the bubbles. I wiped down the drone with alcohol first, then used a microfiber cloth, and lastly tape to take any debris off.
    1. Poor fit and vinyl tends to wrinkle. Color not true to advertisement – way more day glow.
      1. Poor fit and vinyl tends to wrinkle. Color not true to advertisement – way more day glow.
  13. Ok, let me start of by a positive comment. The 3m material itself is a high quality, and the instructions included are simple enough to follow. ( its like following the manual from an ikea). Now here is where i have issue. I choose the japan red, because it appeared online to be a bright red, almost like a paint job you might see from a classic car show. . The issue is that the color is not a bright or brilliant red, it is more a deep red/burgundy color. And the pictures are a little misleading because you think your going to wrap the battery sides and bottom as well. It turns out, that is not included. So really the is not but the main top and front of the cameras that in my opinion really try to cover the dji with this 3m material. I really wish they would have a, given more 3m stickers to cover the drone, the battery, and the controller.
  14. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    Ok, let me start of by a positive comment. The 3m material itself is a high quality, and the instructions included are simple enough to follow. ( its like following the manual from an ikea). Now here is where i have issue. I choose the japan red, because it appeared online to be a bright red, almost like a paint job you might see from a classic car show. . The issue is that the color is not a bright or brilliant red, it is more a deep red/burgundy color. And the pictures are a little misleading because you think your going to wrap the battery sides and bottom as well. It turns out, that is not included. So really the is not but the main top and front of the cameras that in my opinion really try to cover the dji with this 3m material. I really wish they would have a, given more 3m stickers to cover the drone, the battery, and the controller.
  15. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    Had it on for several weeks and several flights. Looks like an aftermarket paint coating, if you take your time the skins go on accurately and don’t bubble up. Haven’t started peeling up at all on the edges.
  16. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    Had it on for several weeks and several flights. Looks like an aftermarket paint coating, if you take your time the skins go on accurately and don’t bubble up. Haven’t started peeling up at all on the edges.
    1. I wanted my drone (the black mavic air) to be easier to spot at distance, and this skin at least partly does the trick. Turned out, install was very easy and i’ve had no trouble hence. My only complaint is that the package does not come with a skin for the battery surface which is the main area (the “underbody”) you see when flying.
      1. I wanted my drone (the black mavic air) to be easier to spot at distance, and this skin at least partly does the trick. Turned out, install was very easy and i’ve had no trouble hence. My only complaint is that the package does not come with a skin for the battery surface which is the main area (the “underbody”) you see when flying.
  17. This review is from : Wrapgrade Poly Skin for DJI Mavic Air | Unit A: Colored Parts and Rear Trim (Airforce Silver)

    I see people saying it was a great fit on the mavic air. White on booth sides on the back of drone. Quality is good just didn’t fit my drone.
    1. I see people saying it was a great fit on the mavic air. White on booth sides on the back of drone. Quality is good just didn’t fit my drone.

Comments are closed.