I questioned wether a device that cost over $100 less than the competition could really work. I performed a test using a few different items, but mainly paint filled water balloons (experiment for our vlog). The device worked perfect for me every time. I didn’t test the distance, but and just over 100′ it worked fine. I don’t have a need to drop stuff a lot so this inexpensive unit fits the bill. I attached it to my landing skids which made it tricky to take off, but avoided the strap covering my downward facing sensor. One downside i experienced was the battery life. The product description says it should last 2hrs. After fully charging mine only worked for roughly 30min. Again i’m not using this as a work horse tool, so not a major concern.
Originally purchased the tr-66 release and the performance was less than optimal. The range was extremely limited. When belinda at top race became aware, she immediately shipped me a new tr-77 model free of charge.
Wasn’t at all sure my d80 would be able to lift a water balloon, but did so very easily. The ease with which my drone took off and climbed upward so quickly, it could probably lift 2 or 3. Pushed the remote’s release button and down the balloon came with a loud splat. Only gave 4 stars because of very short internal device power cable that makes it hard to plug and unplug very tiny battery connector. Also, having to remove battery to charge. An external charge port would have made this product perfect. Purchased tr-77 version not only because of longer control range, but because it’s remote takes regular aaa batteries instead of the expensive button batteries for the tr-66.
This little device can make a drone so much more fun for kids. My son was experimenting with ways to drop parachute toys, etc from his drone and this little device fit the bill. Simple to use and we’ve tested to probably 200 feet with no problems.
The retraction servo is quickly powerful sufficient for heavier loads than a phantom 3 can carry. Regrettably, the variety is sorely lacking. I experienced to fly the drone at considerably less than 100ft to get trustworthy releases, which is not adequate to pop the (okay, so, partly filled or they get way too significant) water balloons i was carrying. Also, you have to facet-mount it – or – clear away the digicam. Facet-mounting tends to make it tough to fly. I believe i will appear up with some form of central, base-mount for it, and see if there’s a way to raise the output of the transmitter. Then this would be a five-star item. I believe the up coming action up is way past $one hundred, and i’m not heading to devote that on what’s actually just a toy for me – but i could see there remaining a legit specialist use for dropping points in superior sites (heck, even bringing resources up to employees on cooling towers and so on. If this had a 1000ft assortment, and a central mount with feet for clearance/retaining central camera see), i might probably stretch to $40, $50. I am quite positive this could be done.
Simple to strap to my dji mavic pro. I can raise a tiny drinking water balloon to 50 toes and drop it on my children. This gets three stars result in even with new batteries it can only be fifty-60 feet away or it loses signal. Fun to participate in about but not useful if you want to fly some thing out a fantastic length and drop it on some unsuspecting bystanders.
i’m loving this detail , i purchased it for my typhoon h but discovered it would not do the job on it simply because there is no area to attach it without having blocking a sensor of just one form or the other. I use it on my hurricane q500 as an alternative only difficulty was the involved strap is to quick to fitvaround the drone but a strip of adhere up velcro set that. I finished up likely to the shop and acquired each individual flyable floatable toy and have been dropping them , my thoughts retains contemplating up of items to drop. I have been tossing the plan all over of employing it as a foundation actuator for some type of bay door that i can things with confetti or rose petals for a forthcoming wedding ceremony.
Functions nicely dropping an arborist’s 12oz throw bodyweight with toss line connected. Can make it a lot less complicated than attempting to goal and start the body weight from the floor to get around tall tree limbs. I was in a position to drop from 125′ above from a dji phantom three, and all the things worked flawlessly.
- Very versatile device.
- Fun inexpensive little device
- Decent Product for the Price
Top Race Drone Clip Remote Control Object Launcher, Release and Drop Drone Delivery
- Make sure this fits
by entering your model number.
- NOTE: This product does not include a Drone, it is a Drone clip ONLY, you will need to purchase a drone separately.
- PATENTED PRODUCT: 180 FEET RANGE!!! The Top Race Drone Clip is a breakthrough in the drone accessories industry which will finally allow you to launch and deliver products with your own drone.
- EASY INSTALLATION: The Top Race Drone Clip installs extremely easy, Simply wrap the included strip around your drone, pair transmitter with clip, load your desired object, fly drone and release whenever you are ready
- WHAT’S INCLUDED: Drone Clip, Clip Fastener, USB Charging Cable, Remote Transmitter, Batteries for Remote and Device, Parachute and water balloons (to start you off with the fun…)
This device is super fun and awesome just don’t take anything dangerous up in the air and you’ll be okay. Very good range i took it over 200 feet up and drop some water balloons loads of fun.
I had purchased a larger remote controlled release from a different company. It was more expensive and stopped working after just a couple of weeks. I ordered this and so far i am very pleased. It is a small release with limited carrying amount, but it is well worth the price compared to those large more expensive brands. Everything was exactly as described and i have already gotten an email from the company asking if everything was ok. I would by from this company again.
i wrote a review earlier where i stated that some of the parts were missing, doesn’t look like that review ever got posted. The parts that i thought were missing were taped to the bottom of the box insert. So the packaging confused me. Other than that, it works as advertised. I think that some of the negative reviews are by people that turn on the device without turning on the remove, then launch their drone, and then when they want to use the remove they turn on the remove after the device has powered down because it was unable to find a remote to pair with when first turned on. I’m using this to drop scrolls and other payloads with a home made rig attached to the outside of a pair of legs on the drone and i also have a gravity powered claw that i use this device to open mid air after grabbing things (will post photos and video of claw rig later) by using string and a fishing weight to open the claw back up when the tr-66 releases the weight/string.
I would have given it five stars if it experienced greater assortment. I like dropping parachuters off my my massive drone. The dolls are the size of the old gi joes so i have to drop them at higher altitudes for the chutes to adequately deploy. I experienced to rig a individual rx and servo on the bottom of the drone and then with a individual tx release the parachuter. It was cumbersome and have been wanting for a much better selection. When i located this kit i experienced to give it a check out. So, if you system on working with small army males size cutters, or drinking water ballons at a quick length then this is for you.
I applied it to drop off a deal to my friend’s dwelling throughout the community but i would surely recommend acquiring a model rocket parachute to provide deals. Also i only gave four stars mainly because the velcro likes to slide about on my drone so additional grip would have been great but all all over a great solution.
Mine came with a lifeless battery in the controller, top race made it appropriate super speedy. I was impressed that they held up with satisfaction. I made a couple of drops 100′ or so, with it strapped to the phantom yesterday, i doubt if i’m heading to be eradicating it, neat,great.
Enjoy this thing, it works great. I have made use of it for fishing and for pleasurable with the h2o balloons. . I did free the clip it came with nevertheless it was my fault, i took my eyes off the balloon dropping and cannot obtain the clip, for now. I improvised and made use of a paper clip which functions just as well.
This solution exceeded my expectations. We’ve had so substantially entertaining with it. The only matter that could strengthen it would be to have a bit more assortment say like 400 ft. I would advocate this merchandise. I attached mine to my hero drone no dilemma hauling up parachutes and minor helicopter occasion favors.
Raising the selection would be helpful, but the largest advancement would be to make the activation pin a clip in itself as opposed to a sliding pin. Assault the equipped clip can affect the item getting dropped negatively ie. A paper airplane or other light-weight objects. If you make the chang to a clip, i’d be much more than satisfied to get on sent to me to take a look at out for you😉.
Pretty simple concept that seems to work well. I did appreciate the high quality velcro that was included with this kit. All in all i’m very satisfied with the purchase.
pretty decent item for the price. I have not experienced any other drone drop devices, but this is about what i expected for the money. I purchased for $20 (incl shipping) and can’t complain at that price. Plastic is a little brittle and lightweight, but it needs to be so that the weight is low. Great entry point for a drone drop device. If i want a higher quality one, i would have to step up to the $190 flifli. Com/flifli-airdrop-release-phantom-fad-1000st/dp/b01mr1yhp6/ref=as_li_ss_tl?ie=utf8&qid=1508633671&sr=8-1&keywords=flifli&linkcode=ll1&tag=thediscountdirec&linkid=269b7d063d903d8c23316da89bfde769).
Works as described, the material is a little thing and feels cheap and weak. But it does work and very well. I’ve had it awhile?and am considering buying another for that just in case feeling. Lol my grandchildren now call me the water balloon ninja, is recommend it because it really does have many uses.
Making use of drone to run antenna traces over trees for newbie radio with a drone drop devise additional.
I originally purchased this to assist pull a drone out of a tree about 60′ up, with one more drone. I fashioned a 10′ very long string with a coat hanger hook on one particular close and a loop on the other. I strapped this unit to the belly of the drone and slipped the moveable rod by means of the hoop. I required to be certain if the hook bought caught on a branch or the drone was much too significant, i experienced a way of releasing the string. Nicely, the drone in the tree is now securely on the ground. I can’t hold out to drop some drinking water balloons.
Only negative matter is that will not in shape on a mavic professional without the need of covering the bottom sensors. You need to have to change the clip in this kind of a way it won’t protect the bottom sensors and it won’t have an impact on the propellers. Should really in shape correctly on drones that will not have sensors on the base.
Didn’t know what to be expecting from the description, but i took a opportunity, and was pleasantly astonished. It performs, what a entertaining addition to your drone. Depending on how strong your drone is, will ascertain what you can carry, and drop, ‘water balloons, minor fellas with parachutes’ it is just enjoyment to engage in with.
This is effective great received it for my magic air. Cauttion when you link nearly anything to the drone make positive you connect a 4 foot string to it or flip off the base sensors or drone will fly away. Because the product your caring will trip sensor and it will enhance frame of mind until finally if flys out of vary.
Fantastic for the youngsters, and we are experimenting with utilizing it for other reasons, this sort of as in release of items in disaster management ( radio antennas ), mesh network devices.
I have looked and looked for a cargo dropping system for a long time. Every one i found was just outside of my price range. This one was right in my range and worked better than described. I was able to drop water balloons from 190 meters up in a suburban area.
I bought this product thinking i would be able to attach wire antenna for ham radio and fly up over a tree and let the wire fall on the other side. Would of been perfect if the drone clip launcher would of fit around my mavic pro without covering the sensors on the bottom of the mavic pro, there are two sensors, as you can see, the item covers one of the sensors. When i slid it all the was back, it still covers one of the sensors. The mavic pro could of not landed on its four legs either because the launcher hung down farther than the legs. I did not even try to start the drone because of these two problems. This would probably work great on another model of drone that has longer launch legs.
Com sent me a hand written apology letter for the missing parts in my original package, and a replacement device that worked much better and contained all the requisite parts. Very happy with the experience and the device. —original post below—couldn’t use the device as it was missing cables that in the documentation it indicates that i was supposed to have to charge it.
I have to say this item has been just great. It functions flawlessly and offers tons of enjoyable. The drone clip’s oficial airship is a single of our syma x8. It can lift it without concerns. You can put in it using double sided tape on a employed camera gimbal mount. This way you can eliminate ir very easily. Once airborne, the mix is a winner. My nephews and my neigbor’s young children. We dropped talcum powder bombs all afternoon. We have also dropped confeti.
Waited a 7 days it finally exhibits up batteries are dead. Some dummy left the switch on. Now i have to go to the store and get batteries.
This drone clip functions fantastic i had it way in excess of 300ft and it labored good to drop a gender expose balloon crammed with paint. I have utilized it multiple occasions to drop distinctive issues like parachutes water balloons and confetti it is labored great every time. As well as this would in good shape on any drone.
I was a little apprehensive about this merchandise, because of to some of the adverse opinions. Even so, it carried out specifically as i hoped. It worked appropriate absent, was valuable up to 50m (was not tested past that). It recharged quickly and effortlessly from usb in about 20 minutes. I applied it with a xiro xplorer drone in my engineering class to have lightweight (300g) university student assignments and release them on demand. I am going to get another a single to have as a backup, and suggest to it my fellow teachers.