Red Rock Carrying Case : Survived a 35ft drop with only a small scratch!

No, it is not large obligation but functions for my reason. Some have complained about it remaining inexpensive and not strong. What are they preparing to do, stand on it?. It is not like it is heading to drop apart if you seem at it difficult. I imagine as extensive as you take care of it thoroughly it will be fantastic. No, i would not place it on a airplane as checked baggage but that is not what i use it for. The other point is that the drone that it retains is not that expensive. Do you want to fork out a ton more for the case than the drone?. Generally this is just a useful way to transportation the drone from property to area with ‘everything’ in 1 case.

Matches all accessories and an additional four batteries and the charger. Even can suit two of the very small quads with controllers in there. Even though i will slash out certain spots for them afterwards. The case is low-priced and a small flimsy but at the selling price i failed to hope a great deal in any case. It appears to be fantastic and would make vacation straightforward.

It suits my syma x5c-one flawlessly. I do not have to remove the digicam, or the landing struts, or even the prop guards. Two slight enhancements i would like to see: one – a place for manuals and a modest notepad, two – a lot more battery slots. There’s lots of room for these factors.

It has every little thing i want and the value was suitable. I filled each individual slot/gap with the accessory it was meant for and it is superb. I can retailer my x5c with props on and there are no difficulties or anxiety on the props. I also fly with out the legs so i can retailer the quad with the digicam and not be bothered by it. I also did some custom made cutting to this case to make it possible for for an incorporate-on fpv procedure (i know, i know). The case is extremely adaptable and shields my tiny x5c from most hurt. I couldn’t sit on the case or stack other significant objects on it. It does flex but with good treatment, it will past me a long time. My only wish was that there was a way for me to things my flight log guide within.

This is really just a storage case mainly because you have to remove the blade guards and the landing struts ahead of storing the quad. Which is ineffective if you happen to be employing it as a field case to transportation your quad from residence to subject and again once again. Until you like re-attaching the guards and struts every single time you go out traveling. Oh, and then having them off all over again when you want to pack up and go. So i wouldn’t simply call it a ‘carrying’ case, additional like a storage case. I was hoping for a subject case. , as do the latches and take care of. We will see how they do in excess of time but truthfully, i don’t see myself applying this that significantly mainly because i don’t want to consider off and re-attach every little thing all the time.

The x5c-one suits in this case completely with prop guards on it. Radio cutout is just right way too. Other cutouts could be a little bit even larger, but there is certainly no 1 structure that would have pleased every person. Be mindful that the resources on the outdoors are not the fanciest or most long lasting. But i’d say that for this cost, and thinking of the benefit of what it can be defending, this case additional than great more than enough.

Carrying Case for Syma X5C X5 Quadcopter Drone

  • Make sure this fits
    by entering your model number.
  • Carrying case for Syma X5C
  • Custom cut out to fit Syma X5C, 4 Battery slots and related parts
  • Classy & Stylish black exterior
  • Please Note: Only the case is for sale (not the quad or its parts)

The case arrived as advertised, though not bullet-proof, its a great case for the quad copter, every little thing fits within, it provides enough protection and don’t forget, its a 30 greenback case shielding a sixty dollar quad copter, if you have a thousand dollar drone, then acquire an proper just one for it. I love mine, thanks from baja mexico.

Not as durable as a road case, but for the cash, this case is terrific. It fits the syma x5c/x5c-one and all your accessories flawlessly, even with blades and blade guards hooked up. I hope it holds up, because this is a great case for the cash and is easily customized.

Extremely awesome on the lookout case with plastic cope with, metal edges, corners, and latches. My only dilemma is that the syma x5sc-1 quadcopter would not match in the case with the landing equipment hooked up (see image). Is this trouble a offer breaker?.No, for me it is no large deal to get rid of the landing equipment, then it matches completely (see the other photo).

So considerably glad that all the components in shape snugly. This incorporates 4 excess batteries, usb, charger and remote. Was not way too joyful that the case was by some means destroyed. I know it failed to transpire in transport because the exterior box was high-quality. Minimal flaw so not truly worth returning.

Likes:• fits the x5c quad copter correctly (i experienced no issues fitting the copter and with its components)• it will definitely guard the copter from hurt in the course of journey/storage (tons of foam)• has some a lot more place for further batteries, chargers, pieces, and many others. • appealing hunting case(it has a good charcoal shade with a reflective tone to it, metal trim, and plastic handle/metal latches• tremendous light-weight (it only weighs three. 94 lbs with the quad copper/remote manage, and components)enhancement recommendations:• it would be great if it was a minor additional sturdy… when you open the lid, you practically truly feel like it may possibly rip the hinges out of the case in excess of time• the cope with on the case is plastic… i would like it was metal• if i stepped on this case i would crush every little thing in it… so it’s not going to defend from a thing body weight-bearing. But if you drop the case it would be great since of the foamoverall:i acquired this case because i actually had no risk-free way to transportation the quad copter… and to retail outlet it to. I study some of the reviews beforehand and i knew that this case was not aluminum or steel or a little something that could really get a beating. I just desired one thing to set this copter in so it is not laying on the ground. As you know, it is pretty effortless to break this point. The price tag in my impression is alright. Even although it is pretty much 50 percent the selling price of the precise copter there is genuinely no other selection i have viewed to retail store/safeguard it. I consider you will be pleased if you know you are having a case that you could store the copter in and vacation to whatsoever area or to use it… it will also hold all the very little parts and batteries that you have to have to maintain this detail functioning.

The only challenge i have is that the syma x5c is affordable sufficient that this is a important portion of the charge of the quad–but which is extra the ‘fault’ of the syma currently being economical, i don’t consider it would be straightforward to occur up with a likewise functional case for less. Holds the quad, distant, spare blades and batteries with really superior defense and superior use of place. Does not truly feel incredibly strong, but additional than sufficient–i am delighted with the acquire.

I bought this for my syma x5sw. It arrived in the promised time, and was in model new pristine problem. The suitcase itself is created of what seems to be skinny wood included with a black glittery laminate. It is traced all over the edges with a silver aluminum trimming. Very shiny and official looking. For those questioning, the quad itself does not healthy with the landing legs hooked up. Not a biggie however as all syma x5sw owners should know they conveniently detach. It will fit with the blade guards hooked up, on the other hand the quad alone will not be cosy in spot owing to the blade guards. I took individuals off as very well since they are conveniently place jointly.

Also has conveniently put slots for your areas and spare batteries.

Flawlessly healthy my syma x5c quad copter with eight batteries and experienced house for all my equipment and resources desired for a speedy correct in the area. Fantastic excellent and the foam keeps everything secure and harmless. A should have for anyone with a syma x5c copter.

I am not absolutely sure what concerns other customers experienced with this product. It took me a week to decide no matter if or not to order this case since of the damaging evaluations that i have study. Mine arrived in outstanding ailment. It is the best case that i have identified to keep my syma x5c, transmitter & batteries neat and organized. The hinge is metallic not plastic as stated in other opinions. The case that i use for my spektrum dx6i transmitter is heavier responsibility, but i also paid a lot more than $35 for it. I would purchase this case once more and advise it to any person who needs to hold their quadcopter safe and organized.

This case fits each my syma and holy stone quadcopters, and presents what i really feel is really excellent defense. The exterior panels are quite skinny but isn’t really seriously an difficulty, it just can make it sense a bit low-priced.

Carrying Case for Syma X5C X5 Quadcopter Drone : We’ve bought a few for the different copters in our family, and everyone’s been very happy with them. They keep the copter and accessories nicely organized and safe when traveling and are very lightweight. Batteries, charger, and extra blades, guards and landing gear all easily fit in the various compartments. We would definitely recommend this to anyone who has an x5c quadcopter.

Accurately what i was hunting for. The outdoors is strong but no where by in close proximity to pelican case good quality. I was on the lookout for a good case, vs. A backpack and this arrived by means of in spades. Not only does it healthy the quad, but you can go away the prop guards on. It has area for my batteries, present-day rely = 7. You can increase a number of other objects into the case. Tends to make the quad search costly.

Every little thing fits properly in this case, no matter whether the blade guards are on or not. The battery slots are a bit tight so don’t force the batteries down much too far or you have to pull the wires to get them out. There is area to make far more slots if you have much more batteries. The case seems good adequate and looks strong sufficient to protect the drone and keep all your sections collectively. Also can be made use of as a consider off and landing pad. I wouldn’t phase on it or lean on it much too difficult in the heart, but for tossing in the car or truck or closet it is a great deal durable and the latches work superior.

This is most likely a solution in line with the price of what it retains. An very entry stage drone held by an exceptionally entry level case. It does suit properly, with out removing the blade protectors and leaving on the landing pads (not confident if these are the formal names lol), and it has ample space for added batteries and pieces. Nonetheless, it is flimsy and there are various weak feeling areas so i have been managing this matter like wonderful china because i know it will not keep up to a good deal. In all, it’s a sound merchandise for a solid entry level drone. Sure, but then the case would expense additional than the drone inside of it, and i’m not about to spend that type of cash.

The minute i bought it i packed up and remaining to fly. I was off in the woods and was up a tree receiving all set the fly from a deer stand (for additional altitude) and i accidentally dropped the case. It landed on a corner and very little was ruined on the case, but inside of practically nothing experienced even moved. I imagined i was going to split everything but it turned out that the only injury that was triggered by a 35ft fall was a modest scratch on the side of the case.

I purchased my x5c-one from a non amazon seller, and my case showed up well in advance of my quad did. My quad in shape beautifully in with landing equipment, prop guards and propellers hooked up. The wifi digital camera needs to be eradicated as it will not have room for the antenna, even so a easy modification to the foam would allow for for it with no any issues. I’d suggest for anybody who needs a terrific safe storage box for your quad.

It would be prefect if i was able to depart the legs on, but other than that it fulfills my requirements to protect my drone and maintain all the things together. The foam is straightforward to modify for extras. I wouldn’t buy this sort of case for a higher-conclusion drone though. I could connect a couple d-rings for a shoulder strap later on for advantage.

It is a first rate case for the price. If i were to have seen it in human being, i would not have compensated $thirty for it. Here’s why:it does not hold a lot apart from batteries/transmitter/quad. The prime foam should come down far plenty of to close more than those people minor pockets, but it actually would not. Everything you put down in there just flies freely around in the best place, which must be protected. My alternative is to incorporate bits of foam to the upper deal with to address over all the pockets so that this would not come about. Nevertheless providing it three stars simply because the case holds my quad safely with no any possibility of problems.

This case is fantastic for my protocol dronium quadcppter and a great worth. It matches the drone snugly within just the foam insert and offers remarkable defense whilst transporting. It has slots for every thing i could visualize needing for this drone, which includes added batteries (i also purchased four with a 4-way usb charger), the first battery, single charger, screwdriver, propellers, guards, distant manage, and guide. I do not generally have a computer system helpful for charging, so i like to use a wall-usb charger for an amazon kindle which performs fantastic, and also suits in this case with several compartments to spare. The case has a awesome shiny complete with steel edging and clasps, and is much more compact when shut than the initial packaging for the dronium (i was shocked it suit so substantially in so minimal house). Funds very well put in for peace of mind yet easy obtain to the drone and all its components.

Loads of storage room and safely and securely transports my syma x5c. It’s quite light-weight and not tremendous-sturdy (this is not an ata case), but it suits the syma x5c and rc transmitter correctly, which includes landing gear, camera, and prop guards, together with excess batteries, charger, spare props, and so forth. It is just not as sound as an anvil or pelican case- but is correctly satisfactory for protecting a.No purpose to fork out additional than what the drone is well worth for a case. 🙂 i like that the hinge is designed to maintain the leading from flopping back again- it sits nicely on a desk. It has metallic hardware, not plastic, and latches securely. It is produced specially for the x5/x5c. Other equivalent-sizing quads could suit it, but you may perhaps will need to get rid of sections or modify the foam.

The case retains my holy stone m68r even with the prop guards connected. It has excess battery slots that are good for carrying added batteries for flight time. I have also included extra aa batteries for the controller as it is wonderful to continue to keep people on hand. The case isn’t really the sturdiest case, having said that it does its job. As lengthy as you are throwing the case all-around you shouldn’t have any troubles with it. I procured three additional batteries and a 5-in-one charger. I’m not one hundred% absolutely sure the five-in-1 charger will match in below, but i am hoping it will.

This is a excellent case for my x5c-one. There is plenty of storage to maintain my spare sections, charger, cords, some smaller equipment, but i necessary a couple a lot more spots for batteries. Properly, there is plenty of area that i lower two much more of my own, one particular to the left an a single to the ideal of the other folks in the upper proper corner of the case. Really sturdy construction, my 2 12 months previous made the decision to stand on the lid and it failed to do everything to the case or my quad. A excellent investment decision for maintaining anything safe and structured.

This is truly a five-star case, but i could only price it three/five simply because i experienced to buy it four situations and return the 1st a few just before i ultimately received a case that wasn’t broken in some way. No matter, this is a best case for the syma x5c quadcopter. It features a ideal reduce-out for the quadcopter, controller, further batteries, additional blades, extra landing skids, charger, and so forth. A definitely pleasant way to shield and have your quadcopter. I just hope the relaxation of you get a pleasant, undamaged product the first time you buy it.

I see what everybody is expressing about the hinges, but if you are very careful with it and do not practically throw the case into your trunk and many others, this case need to last a extended time. Mine arrived without any imperfections. I am at the moment storing my x5c-1 with all 4 prop guards set up, the transmitter, 8 spare props, my equipment (screwdriver and screws) and about eight batteries. If you shop this with no the prop guards mounted, the slots on the significantly left of the photos are equipped to house the prop guards with no issue. Do i imagine it is really a minimal expensive?. Of course- looking at the real quad runs about $60, and this is about fifty five% of the rate. There are no other alternatives out there, until you develop a case by yourself.

The case is practical and will guard the copter. The substance used for the outside the house appears to be to be quite flimsy so if it takes a tricky or sharp hit i would expect it to run suitable by the case. I am a tiny skeptical on its long phrase toughness as very well. For each and every working day receiving all around, the case functions and i like being ready to decide up the case and anything i need packed absent and completely ready to go. Overall although i would have preferred a far better high quality case i am content to have it.

First of all , let us be straightforward, this case matches the x5c1 quadcopter correctly. The within cutouts are just correct for the copter and it’s equipment, having said that, this case is created of low cost laminated cardboard. The deal with is plastic and all steel fittings are thin and the lid is so improperly connected as to feel as even though it may well slide off with the slightest push. The case is pretty overpriced at $35, but i will have to admit that it does seem fantastic, just really don’t be expecting it to present any serious security. I approach on becoming pretty thorough about inserting everything heavy on leading of the case because it could not bear outdoors pounds without the risk of remaining crushed.

This is actually a good case for the price tag. The x5c and controller in good shape perfectly. There is loads of additional storage areas for batteries, extra parts, etcetera. Granted it is not a super heavy duty case but it’s great for having the drone to the place you be traveling, and it’s fantastic for storing the drone.

I failed to have excellent anticipations for this case, but it really is terrific . All my traveling stuff is now neatly arranged, and my quad rests secured in it really is case in the car. Prepared to fly and effectively guarded. Mine has a tiny metallic flake appear on the plastic panels. Components and quad fit correctly, no trimming essential. Have tossed it close to and made use of for a 7 days, and no sturdiness issues or flaws. It is really great to be out in the industry and have spare parts, batteries, charger, and applications out there in this case.

This case is just fantastic for my syma x5c. The drone fits correctly within of it. Will also fit beautifully with the prop guards on. This case is simply just a wonderful invest in. Yes it is a small flimsy on the other hand. It really is made of some kind of powerful cardboard. So dont anticipate it to be totally able to safeguard your drone. Nevertheless it is great to be ready to have the drone where you’d have to have to go.

Great case, every little thing matches like it is supposed to, arrived speedily. My only grievance is that it appears to be so fantastic, i am striving to set a ‘poison’ skull and crossbones on it to hold it from staying stolen from my motor vehicle. Sellers who ship to the us virgin islands making use of usps precedence mail rock, people who don’t.

Fantastic case for traveling safely with your drone. Suits ideal and the has minimize outs for every little thing provided with the drone.

Fits my syma x5c and all the extras that i have acquired for it. Batteries, propellers, additional chargers. Not the most sturdy case that i’ve ever seen but i just required one thing that will secure the syma from the components and have an uncomplicated way to transportation it. Matches syma x5c with landing gear and propeller guard put in like a glove.

Summary
Review Date
Reviewed Item
Carrying Case for Syma X5C X5 Quadcopter Drone
Rating
4.4 of 5 stars, based on 259 reviews

1 Comment

  1. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    Also has conveniently placed slots for your parts and spare batteries.
      1. Perfect case for traveling safely with your drone. Fits perfect and the has cut outs for everything included with the drone.
  2. Perfect case for traveling safely with your drone. Fits perfect and the has cut outs for everything included with the drone.
    1. Everything fits perfectly in this case, whether the blade guards are on or not. The battery slots are a bit tight so don’t push the batteries down too far or you have to pull the wires to get them out. There is room to make more slots if you have more batteries. The case looks nice enough and seems sturdy enough to protect the drone and keep all your parts together. Also can be used as a take off and landing pad. I wouldn’t step on it or lean on it too hard in the center, but for tossing in the car or closet it is plenty sturdy and the latches work good.
      1. Everything fits perfectly in this case, whether the blade guards are on or not. The battery slots are a bit tight so don’t push the batteries down too far or you have to pull the wires to get them out. There is room to make more slots if you have more batteries. The case looks nice enough and seems sturdy enough to protect the drone and keep all your parts together. Also can be used as a take off and landing pad. I wouldn’t step on it or lean on it too hard in the center, but for tossing in the car or closet it is plenty sturdy and the latches work good.
  3. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    A bit expensive for what it is, but there was not many options. I still wanted to protect my syma and its better than nothing. It is very flimsy but should do the job as long as you don’t be to rough with it.
    1. A bit expensive for what it is, but there was not many options. I still wanted to protect my syma and its better than nothing. It is very flimsy but should do the job as long as you don’t be to rough with it.
  4. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    This is probably a product in line with the value of what it holds. An extremely entry level drone held by an extremely entry level case. It does fit perfectly, without removing the blade protectors and leaving on the landing pads (not sure if those are the official names lol), and it has enough space for additional batteries and parts. However, it is flimsy and there are several weak feeling parts so i’ve been treating this thing like fine china since i know it won’t hold up to a lot. In all, it’s a solid product for a solid entry level drone. Sure, but then the case would cost more than the drone inside it, and i’m not about to spend that kind of money.
    1. This is probably a product in line with the value of what it holds. An extremely entry level drone held by an extremely entry level case. It does fit perfectly, without removing the blade protectors and leaving on the landing pads (not sure if those are the official names lol), and it has enough space for additional batteries and parts. However, it is flimsy and there are several weak feeling parts so i’ve been treating this thing like fine china since i know it won’t hold up to a lot. In all, it’s a solid product for a solid entry level drone. Sure, but then the case would cost more than the drone inside it, and i’m not about to spend that kind of money.
  5. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    This case is just perfect for my syma x5c. The drone fits perfectly inside of it. Will also fit perfectly with the prop guards on. This case is simply a great buy. Yes it is a little flimsy however. It’s made of some type of strong cardboard. So dont expect it to be fully able to protect your drone. However it is great to be able to carry the drone where you’d need to go.
    1. This case is just perfect for my syma x5c. The drone fits perfectly inside of it. Will also fit perfectly with the prop guards on. This case is simply a great buy. Yes it is a little flimsy however. It’s made of some type of strong cardboard. So dont expect it to be fully able to protect your drone. However it is great to be able to carry the drone where you’d need to go.
      1. This is actually a good case for the price. The x5c and controller fit perfectly. There’s plenty of additional storage spaces for batteries, extra parts, etc. Granted it’s not a super heavy duty case but it’s perfect for getting the drone to where you be flying, and it’s good for storing the drone.
  6. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    This is actually a good case for the price. The x5c and controller fit perfectly. There’s plenty of additional storage spaces for batteries, extra parts, etc. Granted it’s not a super heavy duty case but it’s perfect for getting the drone to where you be flying, and it’s good for storing the drone.
  7. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    Good case, was able to use this on my x5sw but you have to remove the legs.
      1. A place for everything you’d buy for your drone. I rated as 4 stars instead of 5 because it’s not as durable as i’d like.
  8. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    A place for everything you’d buy for your drone. I rated as 4 stars instead of 5 because it’s not as durable as i’d like.
  9. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    Fits syma x5c-1 like a glove and can carry all spare accessories.
  10. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    Fits syma x5c-1 like a glove and can carry all spare accessories.
  11. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    Case was nice, but the drone has now been lost so the case is in the trash.
  12. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    This case fits both my syma and holy stone quadcopters, and provides what i feel is very good protection. The outside panels are very thin but isn’t really an issue, it just makes it feel a bit cheap.
    1. This case fits both my syma and holy stone quadcopters, and provides what i feel is very good protection. The outside panels are very thin but isn’t really an issue, it just makes it feel a bit cheap.
  13. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    Fit the syma quadcopter perfectly with the accessories and controller.
      1. Great sturdy but lightweight case for a quadcopter. Keeps everything organized well. Seen them priced much higher in local stores.
  14. Great sturdy but lightweight case for a quadcopter. Keeps everything organized well. Seen them priced much higher in local stores.
    1. Holds everything plus extra batteries if you need it to. Fits with the blade protectors on so you don’t have to remove them whtch is good because they’re a pain to take on and off. Very nice , must have for syma x5c owners.
  15. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    Holds everything plus extra batteries if you need it to. Fits with the blade protectors on so you don’t have to remove them whtch is good because they’re a pain to take on and off. Very nice , must have for syma x5c owners.
    1. The x5c-1 fits in this case perfectly with prop guards on it. Radio cutout is just right too. Other cutouts could be a bit bigger, but there’s no one layout that would have pleased everyone. Be aware that the materials on the outside are not the fanciest or most durable. But i’d say that for this price, and considering the value of what it’s protecting, this case more than good enough.
  16. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    The x5c-1 fits in this case perfectly with prop guards on it. Radio cutout is just right too. Other cutouts could be a bit bigger, but there’s no one layout that would have pleased everyone. Be aware that the materials on the outside are not the fanciest or most durable. But i’d say that for this price, and considering the value of what it’s protecting, this case more than good enough.
  17. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    Note that landing legs will not fit in the case on the drone, you must remove the legs first.
  18. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    Note that landing legs will not fit in the case on the drone, you must remove the legs first.
    1. It would be prefect if i was able to leave the legs on, but other than that it meets my needs to protect my drone and keep everything together. The foam is easy to modify for extras. I wouldn’t buy this kind of case for a higher-end drone though. I might attach a couple d-rings for a shoulder strap later on for convenience.
  19. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    It would be prefect if i was able to leave the legs on, but other than that it meets my needs to protect my drone and keep everything together. The foam is easy to modify for extras. I wouldn’t buy this kind of case for a higher-end drone though. I might attach a couple d-rings for a shoulder strap later on for convenience.
    1. Very well built and all pieces and supplies fit snugly into the case. I feel that the quadcopter is very well protected.
      1. Very well built and all pieces and supplies fit snugly into the case. I feel that the quadcopter is very well protected.
  20. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    These are good quality storage and travel cases. They will protect your quad, store your spare parts and extra batteries, and keep you organized and ready to fly. I have two (2), quads, and two of these travel cases, and i highly recommend them.
  21. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    These are good quality storage and travel cases. They will protect your quad, store your spare parts and extra batteries, and keep you organized and ready to fly. I have two (2), quads, and two of these travel cases, and i highly recommend them.
    1. I do believe it is overpriced but i did not shop around much. Maybe $5 cheaper and it would have gotten 5 stars.
  22. This review is from : Carrying Case for Syma X5C X5 Quadcopter Drone

    I do believe it is overpriced but i did not shop around much. Maybe $5 cheaper and it would have gotten 5 stars.

Comments are closed.