Makerfire Matek F405 Wing Flight Controller F4 FC Built in OSD BEC Current Sensor on Board – Buy now if your thinking about it

I’ll get started by declaring i’m new to this programming your own flight management. All over the place i looked this board usually showed up, after obtaining it i have experienced some difficulty programming as a result of inav (operator mistake) , after studying how to use inav this board really shines. For what you pay out this detail is leaps and bounds ahead of the opposition. I have considering the fact that requested another one and will carry on to do so until finally this addiction is stuffed.

I am so psyched for my initially fpv wing after recently beginning mounted wing on an eflight timber. This is probably way far more capable than i system to use in the beginning, but i have gps/mag and other sensors/extras i are not able to wait to try with this fc. I nonetheless require to make my wing but will be setting up quickly. Like any other matek gear, major quality and magnificent element established.

Finding the board in hand the very first time i was genuinely impressed with the format and the top quality of how it was built. This is a incredibly sound flight controller and pretty uncomplicated to setup for someone who has been doing this for a while, as for the newbies i would remarkably propose heading to the matek sys. Com internet site and adhering to the wireing directions. Would acquire yet another from this seller.

By much the very best flight controller for wings and planes.

No amp draw anxieties, sufficient pwm connections for fixed wing things with in all probability a relationship to spare for that substantially essential bomb fall.

Can take time to find out, but remarkable flight controller with inav. Preset-wing fpv extensive-assortment solution.

  • Top of the line FC, if you have the tools
  • Everything you could ever want in a wing FC
  • Ideal plane AIO

Definitely the best most assumed out fc for fastened wing a/c to date. No require for becs, or everything, simply just wire up all the things & it performs. You will will need a high-quality idea soldering iron, flux, desoldering iron or braid, solder (not plumbers solder). I really feel sorry for folks buying goods like this that is not going to shell out $three hundred on very good soldering equipment. They are going to expend 2 times as a lot on a piece of foam with electronics inside of that were being soldered collectively with their dad’s ole pistol grip craftsman soldering. They glob on solder & shorter two or three pads. Then they expend the up coming 30 minutes. Cooking the pcb hoping to desolder using the ‘the heat & sling method’. If you are gonna solder wires to pcb circuit pads you need the good equipment & a fume extractor as properly. Anyway, if you have the appropriate machines to set up it, then this is an superb flight controller.

This is a wonderful f4 primarily based controller with a lot of uarts, embedded hud, and a lot of i/o, so it functions terrific for absolutely automatic traveling.

I requested the matek f411 to exchange an omnibus f4 v3 i experienced in my s800 since the usb broke off. This just one board changed the fc and a pdb i experienced since it has all onboard bec to include all my electric power necessities. Install was sleek and simple and it operates wonderful. Shipping and delivery was quickly took only a day.

I have two birds established up with this fc with m8n gps/compass modules and most up-to-date ardupilot airplane firmware. You have to do a lot of soldering (electrical power wires and all the pin headers you see in the photograph), on the other hand i like the form-aspect (every thing on two. It has a great bec, ample for small to medium planes, which can make it effortless to use fashionable, very successful blheli_32 copter escs, which have no bec. Jointly with a fast rc link and dshot esc output, this provides you instantaneous throttle response. The nicest feature of this aio fc is that all the wiring is centralized and a ton of cost-free house in the airframe is saved, in comparison with pixhawk with independent power modules, becs, osds and stuff. The leading-mounted usb port is also a great contact, since on compact planes, most often than not, the fuselage sides interfere with utilizing the facet usb port on pixhawk and the likes. This is a great deal much better remedy than employing exterior usb ports that are promoted for the pixhawk. There is some rigid vibration damping on the four screw towers, which, coupled with two layers of servo tape for mounting, was enough to handle vibration on my planes.

Eventually the best platform for any preset wing. The way it is established up, the dimension, the appears to be.

Features of Matek F405 Wing Flight Controller F4 FC Built in OSD BEC Current Sensor on Board for RC FPV Racing Drone

  • Make sure this fits
    by entering your model number.
  • Matek Flight Controller F405-WING : Upgraded Flight Controller,it is designed specially for fixed wing.,with 4x BEC current sensor on board.
  • Current Senor: 104A, 3.3V ADC, Scale 317,Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm.
  • 4x BEC on board:2x Motors, 7x Servos outputs , 2x I2C , 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • MCU: 168MHz STM32F405 , IMU: MPU6000 accelerometer/gyro (SPI) , Baro: BMP280 (I2C) , OSD: INAV OSD w/ AT7456E chip , Blackbox: MicroSD card slot (SD/SDHC).
  • Much more details, pls click here:http://www.mateksys.com/?portfolio=f405-wingtab-id-2

Make sure this fits
by entering your model number.

Functions flawlessly, only experienced to swap ail/ele in transmitter mixing, tends to make wings really simple.

I am placing it in a recruit 36′ wing. I do wish it arrived with some pin headers like the 405 for cleaner set up at least two or four for servos at minimum. No rssi, but there are other approaches as a result of sbus. firmware on the board with no issues. Its little like a micro board so have proper soldering abilities and gear.

Considered i experienced some difficulties updating it because practically nothing seemed to do the job but then employed impulse rc driver fixing tool and anything is good.

This is a nicely built flight controller. Great flexibility in programming alternatives.

This is my 2nd f405-wing purchase and i truly take pleasure in its rugged style, fantastic characteristic established and the truth you can use it with both of those inav and ardupilot (i have several mateksys flight controllers and video transmitters and come across their solutions to be significant high-quality, very well packaged, properly documented and moderately priced).

Matek Flight Controller F405-WING : Upgraded Flight Controller,it is designed specially for fixed wing.,with 4x BEC current sensor on board.

Current Senor: 104A, 3.3V ADC, Scale 317,Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm.

4x BEC on board:2x Motors, 7x Servos outputs , 2x I2C , 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)

MCU: 168MHz STM32F405 , IMU: MPU6000 accelerometer/gyro (SPI) , Baro: BMP280 (I2C) , OSD: INAV OSD w/ AT7456E chip , Blackbox: MicroSD card slot (SD/SDHC).

Summary
Review Date
Reviewed Item
Matek F405 Wing Flight Controller F4 FC Built in OSD BEC Current Sensor on Board for RC FPV Racing Drone
Rating
4.3 / 5  stars, based on  26  reviews
Price
$57.99

1 Comment

  1. I love this flight controller. It is packed with features and is high quality. Unfortunately i have run into an issue with the osd. It drops out intermittently. The video is solid for the entire flight, but i always get osd dropouts for several seconds. I can’t seem to duplicate the problem on the ground, but don’t think it is due to vibration as i have had osd dropout after landing with plane stationary. My next step is to swap out the f405, but i’m just curious if anyone has had this problem.
  2. This review is from : Matek F405 Wing Flight Controller F4 FC Built in OSD BEC Current Sensor on Board for RC FPV Racing Drone

    I love this flight controller. It is packed with features and is high quality. Unfortunately i have run into an issue with the osd. It drops out intermittently. The video is solid for the entire flight, but i always get osd dropouts for several seconds. I can’t seem to duplicate the problem on the ground, but don’t think it is due to vibration as i have had osd dropout after landing with plane stationary. My next step is to swap out the f405, but i’m just curious if anyone has had this problem.
  3. This review is from : Matek F405 Wing Flight Controller F4 FC Built in OSD BEC Current Sensor on Board for RC FPV Racing Drone

    Takes time to learn, but incredible flight controller with inav. Fixed-wing fpv long-range solution.
    1. Takes time to learn, but incredible flight controller with inav. Fixed-wing fpv long-range solution.
  4. This review is from : Matek F405 Wing Flight Controller F4 FC Built in OSD BEC Current Sensor on Board for RC FPV Racing Drone

    The main reason i purchased this board was for the built in osd. I’ve been trying for two weeks, watched every relevant video, read loads of documents, basically tried everything i or anyone else can think of. Camera images come through fine. Made sure of all settings in inav and radio set up. Though everything else does.
    1. The main reason i purchased this board was for the built in osd. I’ve been trying for two weeks, watched every relevant video, read loads of documents, basically tried everything i or anyone else can think of. Camera images come through fine. Made sure of all settings in inav and radio set up. Though everything else does.
  5. This review is from : Matek F405 Wing Flight Controller F4 FC Built in OSD BEC Current Sensor on Board for RC FPV Racing Drone

    I have two birds set up with this fc with m8n gps/compass modules and latest ardupilot plane firmware. You have to do a lot of soldering (power wires and all the pin headers you see in the picture), however i like the form-factor (everything on 2. It has a great bec, enough for small to medium planes, which makes it easy to use modern, highly efficient blheli_32 copter escs, which have no bec. Together with a fast rc link and dshot esc output, this gives you instantaneous throttle response. The nicest feature of this aio fc is that all the wiring is centralized and a lot of free space in the airframe is saved, compared with pixhawk with separate power modules, becs, osds and stuff. The top-mounted usb port is also a nice touch, because on small planes, most often than not, the fuselage sides interfere with using the side usb port on pixhawk and the likes. This is much better solution than using external usb ports that are marketed for the pixhawk. There is some stiff vibration damping on the four screw towers, which, coupled with two layers of servo tape for mounting, was enough to manage vibration on my planes.
    1. I have two birds set up with this fc with m8n gps/compass modules and latest ardupilot plane firmware. You have to do a lot of soldering (power wires and all the pin headers you see in the picture), however i like the form-factor (everything on 2. It has a great bec, enough for small to medium planes, which makes it easy to use modern, highly efficient blheli_32 copter escs, which have no bec. Together with a fast rc link and dshot esc output, this gives you instantaneous throttle response. The nicest feature of this aio fc is that all the wiring is centralized and a lot of free space in the airframe is saved, compared with pixhawk with separate power modules, becs, osds and stuff. The top-mounted usb port is also a nice touch, because on small planes, most often than not, the fuselage sides interfere with using the side usb port on pixhawk and the likes. This is much better solution than using external usb ports that are marketed for the pixhawk. There is some stiff vibration damping on the four screw towers, which, coupled with two layers of servo tape for mounting, was enough to manage vibration on my planes.
  6. This review is from : Matek F405 Wing Flight Controller F4 FC Built in OSD BEC Current Sensor on Board for RC FPV Racing Drone

    Was funny voltage always wrong nothing would configure it properly and had tons of bugs pretty pissed off i wasted money on this when there are several better options for less.

Comments are closed.