Ideal one i have obtained palms down.
All these testimonials are of the even larger quad it can be not even the identical quad do not fully grasp why your assessments for a single quad are on an additional quad subscription if you want to sell more of these you obtained to independent the descriptions from every single product.
Way to slim to fit substantially of anything at all but. If the hull was 3mm broader it would be perfect.
Good long range fpv platform. Went with aira 2508 1200kv motors on 2200mah 6s or 3000mah 5s.
This is a fantastic frame with a good deal of area for anything. I have crashed it a number of moments, and nothing has took place. I advocate this to everyone who wishes a good frame that you know you can rely on. The 1 thing i did not like is that with the fpv digital camera i was working with, it was a minimal tricky to get the prime on since the two parts that maintain the digital camera have been currently being pushed apart. But that is not really the frame’s fault. If there was a four 1/2 stars i would charge it that.
Genuinely pleasant frame for the value. As someone who buys quality frames for racing, i acquired this as a pleasurable small lr undertaking and it’s been good.
iFlight XL7 V3 True X 7 Inch 295mm Long Range FPV Freestyle Frame Kit Carbon Fiber FPV Frame
- Make sure this fits
by entering your model number.
- This 7 inch freestyle frame gives you ultimate control over weight distribution and CoG by not only allowing the use of M3x30mm standoff but also offering a reversible build orientation for a true mid-mount set up.
- V3 upgraded with chamfered edge, high quality pure 3K carbon fiber fpv frame
- Compact Design: True-X motor layout with removable 4mm thickness arms
- Grade 12.9 Black Nickel Plating high quality screw hardware
- 7 inch quadcopter frame can adjustable camera placement,support the width of 28mm camera
On the lookout forward to long range fpv with this person. Would like equivalent frame with for a longer time wing span. As for this 1, 8′ props are max dimension. Also press nuts are located properly, just consider your time. It was a minimal discouraging, but so glad i got it.
These iflight frames are low-cost, but incredibly tough. Some other inexpensive frames, the screws have a inclination to slide out. Also, these go alongside one another nicely and easily. I have the xl5, the xl6 and the il5. All decent frames for the rate. They are not an armatton, but they get the career finished for the most aspect.
Drawing for xl8 v3 demonstrates press in nuts in the base, but they are pressed in the x shaped cross-member. This has the nuts sticking up in the region below the four in 1, pdb or fc stack. Would have chosen the countersunk screws be down below the electronics, as in the drawing. See the pic for the areas/drawing comparison. Other than that 1 distinction, this is 8 inch is a extremely good long range drone. 5mm thick and are really stiff. When matched with reduced torque motors, this will make a very wonderful long range drone. The components main is rather slim, but it is broad plenty of for the regular 30.
Cargo was super speedy 2 days. Packaging seems incredibly qualified. The in good shape and complete are totally fantastic. Clean clean up cuts with sanded edges and match jointly with relieve in considerably less than 5 minutes. Can not wait for my other sections so i can put it all collectively. I subtracted 1 star owing to there is 1 piece lacking in the drawing which my instrument is pointing to and is not in the kit. This aspect would be a digital camera mount. I you should not know if that is intentional or just an oversight. I will make contact with the seller to come across out and adjust my critique. Update: i contacted the seller and the piece wasn’t missing.
Like the glimpse and experience i have crashed it a pair moments presently and the best frame splintered a but not bad but total its a pleasant frame.
My xl8 v3 frame arrived in a pretty good plastic wrapped box. All the sections and screws were properly packed in plastic inside. It came with two battery straps, foam stick on landing ft and some stickers as nicely. The cut of the carbon was major notch with chamfered edges on all items. There seems to have been some variations made to the way the frame goes collectively for the reason that my construct recommendations that came with mine are various than the picture in the description. My challenge is the press-in good shape nuts were presently set up and 4 of them were put in in the improper holes. The establish recommendations i acquired demonstrate all eight of the push-suit nuts should really be put in in the base plate. Mine has 4 in the bottom plate and four in the mid-plate that goes on prime of the arms. Also, there ought to have been countersunk holes in the mid-plate that allow the screws to sit flush on prime and go down via the arms and into the press-fit nuts in the bottom plate. Mine has the countersunk holes in the outer holes where by the flight controller must mount.
I like this frame, fly magnificent.
This is an fantastic frame,its coated and chamfered. The true x style tends to make it fly amazing also.
Not lousy so much, appears strong and organization. Great rounded edge carbon arms. My main criticism would be the compact fuselage which is about the measurement of a standard 250 quad. I’ll update the moment i have done the create and fly a couple of packs with it.
I’m utilizing it for my to start with try at a semi-long range gps quad. Really multipurpose for mounting electronics and other components. Xl6 frame, kakute f4 aio v2 flight controller (on inav 2. one), unify pro vtx, x4r-sb receiver, neo m8n gps, runcam split 2s digicam, hakrc 35a esc’s, brotherhobby r6 2205 motors, diymall oled exhibit, hc-twelve module for long range telemetry, and heaps of time for trial and error.
Very excellent frame, minor inconsistencies, 2 of my arms were being three. 7mm and the other folks were 4mm.
Xl5 lowrider v3 would seem like a good sturdy frame but be aware if you are making use of sections you by now have like i am your digicam might not match. I have a runcam swift 2 and it does not have room to swivel down. You’ll be caught at an extraordinary angle like in the hooked up pics. You could probably get even bigger standoffs to give far more room in the frame but then you will not be in a position to use the digital camera mountable sidewalls. You may see in the description that it will come with micro camera adapters which i have now requested. Foxeer predator micro if you happen to be curious.
Pretty sick little frame it can be extremely strong and fly’s very well and hauls some critical ass running emaxx 2306 2400 kv 5s battery. Experienced some small vibration troubles here and there some tender mounting cleaned them up.
This is a reliable frame, seriously excellent for the value.
Stable bottom frame ideal size , first rate selling price and excellent packaging.
I wrecked it, no frame could taken care of crash, i strike stadium lights pole about one hundred ft up total speed, but it took tons of abuse ahead of that.
I did not use the fpv-cam ‘cheeks’. My only dislike is the grip-nuts mainly because they were so really hard to put in. They should really be pre-mounted. Other than these, the 3k carbon seems incredibly solid and i like the frame just fine. This a single has produced me take into account a 5′ version upcoming time i need to have a single.
I have made this into a 6s freestyle make. I like the slammed design and the use of five inch props on a 5. This permits for the air to be extra ‘clean’ as you are traveling and will make the quad sense like it flies seriously perfectly. They have now made a newer version that i have still to check out but i will a person working day. It was a good rate and has a fantastic worth for dollars. I do not regret this obtain.