Good bottom frame excellent sizing , decent selling price and remarkable packaging.
Wonderful kit , awesome carbon ,performs.
Seriously awesome frame for the price. As someone who buys quality frames for racing, i bought this as a enjoyable tiny lr project and it is really been wonderful.
I really like the point it will come with the tpu antenna mount. It obtained just the suitable amount of money of flex to not damage your stubby antennas. I have crashed dozens of times rolling throughout the field and always been ready to turtle out and fly household. I’d suggest employing blue lock tight on the components. From tricky flying this frame does feel to get loose.
Not lousy so significantly, seems good and organization. Awesome rounded edge carbon arms. My principal grievance would be the smaller fuselage which is about the dimension of a typical 250 quad. I’ll update when i have concluded the construct and fly a several packs with it.
Xl5 lowrider v3 would seem like a good sturdy frame but be mindful if you are utilizing components you previously have like i am your camera may possibly not healthy. I have a runcam swift 2 and it does not have room to swivel down. You may be trapped at an serious angle like in the hooked up images. You could possibly get even larger standoffs to give extra place in the frame but then you will not be ready to use the digicam mountable sidewalls. You are going to see in the description that it comes with micro digital camera adapters which i have now purchased. Foxeer predator micro if you happen to be curious.
Some issues, but not bad
Parts Not the Same as Drawing! on 8″ model.
XL5 Lowrider V3 Does not fit standard FPV camera
Cargo was super fast two days. Packaging seems to be extremely expert. The healthy and finish are definitely good. Clean clear cuts with sanded edges and in shape jointly with relieve in considerably less than 5 minutes. Won’t be able to hold out for my other sections so i can place it all alongside one another. I subtracted 1 star thanks to there is a person piece missing in the drawing which my instrument is pointing to and is not in the kit. This section would be a camera mount. I will not know if that is intentional or just an oversight. I will call the vendor to find out and change my review. Update: i contacted the seller and the piece wasn’t lacking.
This is an excellent frame,its coated and chamfered. The true x design makes it fly awesome also.
Rather excellent frame, small inconsistencies, two of my arms have been 3. 7mm and the some others had been 4mm.
I destroyed it, no frame could handled crash, i hit stadium lighting pole about 100 ft up full speed, but it took tons of abuse before that.
Way to slender to healthy significantly of something but. If the hull was 3mm wider it would be ideal.
Features of iFlight XL10 V4 True X 10 Inch 382mm FPV Freestyle Frame Kit Carbon Fiber FPV Frame
- Make sure this fits
by entering your model number.
- Upgraded version 10 inch fpv frame, the main advantages of the XL series V4 are in the flight performance, the stronger and thicker arms
- The XL series V4 frames fly balanced because of the true X configuration and wide stance. This main change makes flight stability in the air
- 10 inch carbon fiber frame compatible with 20*20,30.5*30.5 mounting holes to ensure the perfect fit for any and all of your flight hardware
- High quality pure 3K carbon fiber fpv frame
- With 6.5mm arm, keep the arms swaps much more easily
iFlightRC is privileged to announce the release of the XL series V4 Frames, the XL series V4 frames are the achievement of Team iFlight Pilots, customers experience in FPV and the advancements of flight technology and improvement to onboard electronics. In the past few years, so many electronics advances make the XL frames to be updated again. In order to keep things compact, light and simple to be assembled. We kept 2 options for the flystack mounting(20*20mm & 30.5*30.5mm) to ensure the perfect fit for any and all of your flight hardware. Kept the arms swaps much more easily.
The main advantages of the XL series V4 are in the flight performance, the stronger and thicker arms. The XL series V4 frames fly balanced because of the true X configuration and wide stance. This main changings makes flight stability in the air.
Full 3K Carbon Fiber airframe
Popular True-X configuration
Compatible with 20*20,30.5*30.5 mounting holes
Compatible with 22/19mm camera and reduce vibration
Easy arm swaps
– Frame weight: 218g approx
– Wheelbase: 382mm
– Body Dimensions: 270x270mm
– Standoff Height: 26mm (4pcs), 35mm(4pcs)
– Mounting Holes: 30.5*30.5mm/ 20*20mm
– Maximum support 10 inch proepller
– Suitable for XING 2814 motor
1set x XL10 V4 frame
1set x screws
1set x standoffs (blue or black random )
1set x TPU Camera mount adapters
1pc x TPU VTX antenna mount
2pcs x battery anti-slip mat
2pcs x battery straps
Recommend parts(Package no included):
*XING 2814 Brushless Motor—–B07RXXR8YP
*SucceX F4 TwinG V2.1 Flight Controller—–B07ZF5GK84
*SucceX 50A 2-6s 32bit 4-in-1 ESC—B081C1GPSM
*The Force Long Range 1000mW VTX—–B07R7TKGR5
*RunCam Split 3 Micro FPV Camera—B07V5TD74D
*Foxeer 5.8G Lollipop Antenna SMA Male—–B07D12XS6K
*HQProp 9x5x3 propeller—-B07SYFX67F
Make sure this fits
by entering your model number.
I only want there were much more 8in props obtainable. Nevertheless, you can operate 7 or 6in props no dilemma.
Searching ahead to prolonged vary fpv with this guy. Would like very similar frame with for a longer time wing span. As for this just one, 8′ props are max dimension. Also push nuts are located correctly, just take your time. It was a very little irritating, but so happy i obtained it.
This is a fantastic frame with a lot of house for all the things. I have crashed it various situations, and nothing has took place. I suggest this to everyone who would like a solid frame that you know you can have confidence in. The one issue i did not like is that with the fpv digicam i was applying, it was a little hard to get the leading on for the reason that the two pieces that maintain the digital camera were currently being pushed apart. But that is not seriously the frame’s fault. If there was a 4 one/two stars i would price it that.
Most effective a person i have purchased fingers down.
These iflight frames are low-cost, but extremely resilient. Some other low-cost frames, the screws have a inclination to drop out. Also, these go together nicely and simply. I have the xl5, the xl6 and the il5. All respectable frames for the rate. They are not an armatton, but they get the career performed for the most element.
I did not use the fpv-cam ‘cheeks’. My only dislike is the grip-nuts due to the fact they were being so difficult to set up. They should be pre-put in. Other than these, the 3k carbon appears really solid and i like the frame just fine. This a person has designed me think about a 5′ variation following time i require a person.
Upgraded version 10 inch fpv frame, the main advantages of the XL series V4 are in the flight performance, the stronger and thicker arms
My present most loved freestyle frame. Bought a second just one as i like it so much. Iflight did a fantastic work on this design and style.
All these assessments are of the even bigger quad it truly is not even the exact quad never recognize why your critiques for just one quad are on one more quad membership if you want to sell far more of these you received to different the descriptions from each individual design.
This is a reliable frame, truly superior for the selling price.
Drawing for xl8 v3 shows press in nuts in the base, but they are pressed in the x shaped cross-member. This has the nuts sticking up in the area below the 4 in 1, pdb or fc stack. Would have preferred the countersunk screws be below the electronics, as in the drawing. See the pic for the parts/drawing comparison. Other than that one difference, this is 8 inch is a very nice long range drone. 5mm thick and are very stiff. When matched with low torque motors, this will make a very nice long range drone. The hardware core is pretty narrow, but it is wide enough for the standard 30.
Fairly sick small frame it truly is incredibly strong and fly’s well and hauls some severe ass managing emaxx 2306 2400 kv 5s battery. Experienced some minimal vibration issues below and there some soft mounting cleaned them up.
Enjoy the search and sense i have crashed it a couple situations previously and the top rated frame splintered a but not terrible but all round its a awesome frame.
The XL series V4 frames fly balanced because of the true X configuration and wide stance.
My xl8 v3 frame arrived in a extremely pleasant plastic wrapped box. All the sections and screws were nicely packed in plastic inside. It came with two battery straps, foam adhere on landing toes and some stickers as very well. The lower of the carbon was top rated notch with chamfered edges on all pieces. There seems to have been some changes produced to the way the frame goes together mainly because my build recommendations that arrived with mine are unique than the photo in the description. My issue is the press-in good shape nuts ended up previously mounted and 4 of them have been mounted in the completely wrong holes. The build guidance i acquired present all 8 of the press-healthy nuts should be installed in the base plate. Mine has four in the bottom plate and four in the mid-plate that goes on top of the arms. Also, there must have been countersunk holes in the mid-plate that permit the screws to sit flush on top and go down by means of the arms and into the push-healthy nuts in the base plate. Mine has the countersunk holes in the outer holes where the flight controller ought to mount.
I’m employing it for my 1st try at a semi-very long array gps quad. Quite functional for mounting electronics and other hardware. Xl6 frame, kakute f4 aio v2 flight controller (on inav two. 1), unify professional vtx, x4r-sb receiver, neo m8n gps, runcam break up 2s digicam, hakrc 35a esc’s, brotherhobby r6 2205 motors, diymall oled display, hc-twelve module for very long vary telemetry, and lots of time for demo and error.
I have equally the xl 5′ and 6′ frames preceding this version and i have received to say with the narrower entire body and arms it can make for a smooth searching rig. Iflight has acquired some good frames when it will come to freestyle at an affordable price. The totally free shipping and delivery is what i like.
Ideal frame for freestyle mahalo & aloha from oahu.
I need to buy all the other components, but i love the frame. Only i spect to be a little bigger, i put 4 stars because it didn’t bring me the 1pack x screws. I must change the rating to 5 starts. I received the feedback from the seller and everything is ok now.
I haven’t flown my quad more than 60 ft off the air yet, because im learning. But i built the quad using this frame and it is pretty strong. Ive had rough landings and nothing happened to the frame other than a few scuffs. I am enjoying this frame so far i might not bother buying frames anywhere else if it continues to hold trough my learning process.
Great prolonged vary fpv platform. Went with aira 2508 1200kv motors on 2200mah 6s or 3000mah 5s.
10 inch carbon fiber frame compatible with 20*20,30.5*30.5 mounting holes to ensure the perfect fit for any and all of your flight hardware
I have manufactured this into a 6s freestyle develop. I like the slammed fashion and the use of 5 inch props on a 5. This permits for the air to be much more ‘clean’ as you are traveling and can make the quad experience like it flies genuinely very well. They have now designed a newer model that i have however to test but i will one particular day. It was a fantastic value and has a wonderful price for dollars. I do not regret this invest in.
High quality pure 3K carbon fiber fpv frame