DecalGirl Solid State Decal : Looks really cool!

Ive used decalgirl skins for pretty some time. My very first skin was for my phantom 3. I’ve used them on most of my drones given that. I observed with the mavic a person decal established however the good quality of the skins started to decline. I’ve experienced troubles with the arm decals coming off in mid flight due to inadequate design in as to where by the decals ‘wrap’ i had to modify the arm skins to continue to keep factors safe and sound. Having a decal come off in mid flight and coming into make contact with with a prop would be a disaster. The mavic two skin seems to have the similar arm troubles. I know they are likely for a clear glimpse, but the bends are way too sharp and must be scored to properly in good shape with no concern of the decal coming up. Word of warning for the inexperienced. If you do not modify the skin, make confident you extensively check your chook right before every flight to make sure none of the arms are experiencing lifting of the skins.

Appears to be a terrific skin so much. I am going to update as time goes by. I wanted one thing that was higher visibility so that my mavic would be a lot easier to see at a length towards trees, etcetera. The skin is a awesome brilliant color and arrived packaged beautifully to stop any bends in transport. The bundled instruction sheet confirmed wherever all the things necessary to go. It took about an hour to put in. About the only detail i wish was greater, is the coverage on the front legs. It is really not huge adequate to fully go over the gold stripes on the arm. No subject how i positioned it you can nonetheless see the stripes, either on the prime of the arm or on the entrance. I centered it, which is the place it appears to be developed centered on the rest of the shape, which leaves the stripes seen on both equally sides.

Favored currently being equipped to insert a new glance to ‘wally’ and all the pieces appeared like they are effectively designed, trimmed and slash and healthy nicely. The only point i would modify is to make the most important decals that span the entire dorsal section a single piece. This could be manufactured with particular sections meant to be reduce absent the moment the decal is in area. This way you could attach that piece to the whole back again, ensuring it all strains up perfectly, and then trim out the battery. Would also be fantastic if additional of the decal pieces could remain related and fold all-around the drone physique to produce a more unified search. (only provided these because they questioned in email for any advancements. These may well or could not be possible, not everybody will always agree with them. )in general very happy with the decals.

My 1st impression of the product was that it was pretty well designed and packaged properly for shipping and delivery. It was protected in cardboard to avoid bending and wrapped in plastic. The design and style facet of the skin was a matte shade that was correctly portrayed in the shots and the back aspect was a criss cross texture that prevented the skin from shifting once it was used. The guidelines had been reversed for some pieces but a little popular perception makes installation uncomplicated. If there are any bubbles in the substance, it is really quick to push them out and sleek anything out. The significant aspect is to utilize a great deal of tension and keep for about 20 to thirty seconds and the adhesive will keep. You can also choose items off and reapply them if you mess up. It is really also essential to consider your time with the set up. The only smaller criticism i have is that some of the yellow stripes on the arm of the drone are nevertheless obvious soon after implementing. I’m however offering it 5 stars since the content is extremely substantial quality and straightforward to utilize (and reapply) and the all round coverage of the drone is very great for how advanced the design is.

Better product than expected. At initially it is actually difficult in some parts to make the sticker remain. I experienced to use some rubber bands to hold the skin caught to the drone. Just after a single night i taken off the rubber bands and almost everything looked wonderful. I’m over-all incredibly contented with this item. I believe this is a prime notch skin. From the packaging of the solution to how detailed and very well minimize anything is, i’d give this 6 stars if i could. The city camo design and style appears to be just astounding. I did not use the stickers that include the metallic areas in the bottom as these are utilised to cool the electronics inside (yes i’m paranoid that way hehe).

I’ve had this on my mavic for a handful of months now, and it is a good established. I attempted two brand names, but this is much much better than the slickwraps version. It has a good come to feel and, more importantly, conforms to the form of the drone substantially better. In this photo set, i’ve involved some of the other model wrap (orange). Inspite of attempting every little thing from really hard pressure, to softening with a hairdryer to pressing firmly for around an hour nonstop, the orange skin just won’t continue to be attached to concave shapes, as you can see on the pictured mavic battery. The decal female wrap stays on (nearly) flawlessly. The only exception looks to be a tiny carry in a lot less visible spots. The orang slickwrap has some good attributes heading for it, but i like the decal female version a lot much better. I’m extremely satisfied and would enthusiastically advise it.

I have requested several decals from decal woman. The quality is high in the cuts are perfect. Nonetheless with that said, spot in the drone in the case and eliminating it from the situation as well as having off and landing has begun to peel specified spots of the decal. I’m just not absolutely sure that it’s realistic for prolonged-time period use on the drone. But if i lose if you want the base it’s not genuinely that big of a deal. Will purchase from this vendor once more.

But on the legs & arms locations, you will detect that the sticker will not cover or go all the way around arms brief by 1-2mm. Only 1 battery deal with sticker. Should provide or appear with a established of further battery addresses. Even if they are just black to match any shade you have, would be a fantastic solution.

I have used a number of various sorts of skin for the mavic pro, but the coyote camo decal is my favorite and the best. Regrettably, i crashed the mavic not even a week just after i set on the decal. The crash did a very little harm to the decal, so i requested the exact same 1 once again. Believing in superstitions, i would’ve gotten rid of the camo decal, but it looks so excellent on the mavic that i just purchased a further a person. I just wished providers would market decals with far more than just 3 battery addresses. The skins from decal girl had been of awesome good quality and luckily for us given that i’m in the very same state as decal woman, i obtained my skins serious speedy. I will absolutely suggest and keep on to get skins from decal female.

Very descriptive recommendations and well believed out kit. Set up requires time but everything in good shape flawlessly. I was impressed with the cuts and structure. I was disappointed with the design high-quality although. I would not pick out the city camo once more. The traces are not crisp, they have fuzzy edges. The white is not very white and the gray has a purple hue to it that i seriously really do not like. Every little thing showed up on time while and effectively packaged with fantastic recommendations.

Just been given my decal female decal. If you have any challenges (you in all probability did not enjoy products films) just cease and watch an put in vid and you’ll be great. There are decals that use overwrap, this is not one of them so you will have a handful of edges the place the drone base demonstrates but the general seem does not seem to be negatively impacted. I was worried at first but finished task arrived out just as exhibited in advertising. I haven’t been in a position to fly given that installing decal (undesirable temperature) so i just can’t communicate to toughness. Even so i feels solid an consumer help has been phenomenal so much. I’m guaranteed any challenges will be quickly addressed.

Quality is fantastic and effortless to install. When i say easy to put in, i imply it does get a though to get it all on but it is not really hard at all. If you get an wrinkles just hit it with a blow dryer and rub it down with a microfiber fabric and it smoothed out perfectlyif you operate into any concerns, decalgirl has assistance video clips for just about anything you would have to have as well.A+ companyit unintentionally matches my camera bag correctly so i enjoy it even a lot more.

Remarkable productit took me all of 45 minutes, getting in no way tried wrapping anything at all, let by yourself a little something with so numerous curves and edges. The product or service is extremely very simple and extremely malleable, if you make a oversight just gently peel it up and re-established it. In all actually i failed to look at the movies at all, it was just really intuitive. Good merchandise guys, i would unquestionably get more. My only smaller gripe is i have 6 batteries and there are only 3 battery skins.

The exo neptune colour is not as marketed, but not misleading on function. The shades are ton a lot more uninteresting and blue than aqua marine or turquoise, as you are led to imagine from the photos. Really don’t get me improper, the drone still seems incredibly neat with this style.

Regrettably it failed to arrive with guidance for what section when exactly where, and so i had to obtain a youtube video to see exactly where all the components went. That mentioned, the suit and complete is fantastic. Btw your area expired, so the hyperlink on the vinyl sheet is out of date. I desire it had been a little much less expensive but all round i’m happy. Contemplate including a one-pager with recommendations, but retain carrying out good do the job.

The application takes a little bit but it is worthwhile, my drone took a spill in a lake once because of a small branch autopilot didn’t detect and another time on land too. Autopilot issues aside, the decal has held up remarkably well with not much scuffing or tearing and it is still stuck on well.

I got a decal for my mavic air from decal girl and loved it. So here is the pic of my mavic pro. Excellent quality but the fit wasn’t quite as tight as the air. The seams do show a bit of the gold stripes on the arms. Now the 2nd photo is a blunder of mine. Is there a way to remove then reinstall the skin after a day of it being on there?.

Solution is completely excellent. Large high quality materials, minimize outs are best and incredibly very good price for the top quality. Took me a little more than an hour to implement but i was going quite gradual and working with a blow dryer to warmth up the adhesive and get any wrinkles out. I experienced a couple slight cosmetic scratches on the drone and now this skin covers that i mainly have a brand new drone now and it couldn’t look cooler. I even obtained 1 for my ipad mini4 to match considering that i use it for my mavic pro and it matches flawlessly. If you are taking into consideration this product or service, prevent looking at and acquire it now. You will not be disappointed, i guarantee.

Reasonably great in shape, not fantastic. There are concerns connected to the digicam cover it will catch and peel when you consider off the address if not very careful. A fast snip with some scissors or a hobby knife will correct the concern nevertheless.

These decals are really substantial high-quality and finest of all, modifications the overall look of your mavic. It requires about and 1 one/2 hour to set up them, but its well worth the effort and hard work. I chose the orange urban camo so its uncomplicated to location in the sky and just really like the colour. The packaging came in a wonderful envelope, nicely safeguarded and very self explanatory.

All the things was very straightforward to set up. I didn’t even actually have to have any of the guidance. Thoroughly clean surface, thoroughly clean hands, and logic will get you by quite swiftly. The decals are substantial high quality and fantastic higher definition and it is not flimsy or paper slender like some decals i have gotten in the earlier. Anything strains up flawlessly. Offers an awesome new glance to the drone way too. Certainly truly worth the investment decision. Terrific defense, great appears to be, and i am super content with it.

I bought the “solid state lime” due to the fact it appears to be high visibility neon yellow in the photograph. Though it does have a neon seem to it in sunshine gentle, it is nowhere near as brilliant as the image helps make it out to be. A guesstimate, it’s in all probability about two/3 as vivid. That is the only motive why i rated it only 4/five stars. That mentioned, the shade is nevertheless captivating to me so i will retain them. It is a pretty durable felling plastic that has a thickness that is fantastic for this application it is not paper and the colour isn’t like a low-cost printer ink possibly so it can be wiped clean up with ease devoid of ruining it. All in all when i experience like modifying the seem of my drone yet again, i will adhere with this manufacturer as it is extremely fantastic top quality. “stick” with this manufacturer.

This skin suits great and is fairly quick to use. I used mine, place it in entrance of a heater for about 30 mins, then went back around the skin with my software to give it a additional protected adhere. That appears to have completed the trick. Search great and it is not as uninteresting any longer.

Has tremendously served me out in places about drinking water wherever i will need to continue to keep visible on the drone. Now i can easily location its site when as before i could not get its spot. Whilst i’m not to sure how extensive it will past. From the in and out of my dji bag. Finishes are by now starting off to peel up. But i was expecting that to transpire as properly. I think i can easily get a year out of it in advance of obtaining to replace the skin.

My drone appears to be amazing asf now. You hust have patience and a first rate ability of puzzle resolving abilities to get a excellent searching ultimate product or service. But its all there and isnt as hard to set up as some individuals have manufactured it sound. Im really picky and not the moment did i get annoyed imagining its messed up. Line points up evenly and go in buy and it’ll get the job done out. If it doesnt line up ideal peel back and consider yet again. Thoroughly clean the drone with liquor and make confident your fingers are cleanse and dry.

I don’t normally right reviews with photos but i sure like looking at detailed reviews when i’m looking for an item so i will for this. This decal wrap is a very good product. Take your time and wipe down your drone with a dry cloth. Do not use alcohol to clean ( you can use a damp cloth then followed by a dry cloth) decals are easy to install just give yourself an hour to do it right. Decals stick nicely and i would buy again.

Feels like a terrific offer for a large excellent product or service. I’ve only experienced my mavic pro for a couple months, but it’s bought a number of decent fight scars i needed to deal with up. The assortment of designs and patterns is awesome.I lastly settled on digital navy. Just like the pictures in the merchandise description. Software was fairly easy. I only had minimal challenges at very limited or uncomfortable spots. >>>>>tip: use a silicone icing spatula from your kitchen area for the tough spots.

The only issue i have is i have cleaned my mavic before and have flown it over 30 hours so the decals don’t stick as well as they could. It’s best to put this on a new drone before it’s exposed to the environment. Like getting a expensive new phone and installing a case and screen protector before it’s first use. So if your drone has been handled the oils in your hands and other environmental contamination will get in to the paint causing these not to stick so well.No amount of safe cleaning will help unless you want to damage the paint with strong solvents not something i will do to my drone.

This is the least complicated and very best decal i have at any time utilized. I experimented with other models and they wrinkled or had bubbles in them and they seemed like crap. The decalgirl decals go on effortlessly and wrinkle free. They keep tight but can be peeled off if you want to get rid of them. I hugely advocate these decals for your drone. They strengthen visibility as very well as secure your drone holding it seeking new.

I have to say that this is a great product. Each piece was perfectly cut and fit the drone 100%. In order for it to fit them all correctly, you need to have patience and take your time. I am amazed at how well this fit with all of the compound curves and angles, but it doesthe decal material is thick and durable enough to last a very long time and will come off clean with no residue. It will probably be helpful absorbing and superficial scratches during transport or crashes.

The decal material is good. Every single piece was quickly eliminated from the backing. I have worked with some other decals that were a bear to peel off. These had been easy to peel and the decals are thick so as not easily torn through set up. I only had two problems with set up. Placement of the entrance, ahead going through decal did not quite go over the two gold paint line on the mavic at the edge. I could have potentially lined it up far better. It’s possible a notice in the instructions about the placement of that decal. And just one of the other decal pairs has a incredibly sharp triangular suggestion. In my expertise, these edges are the types that are inclined to snag and make it possible for for peeling.

Overall satisfied with the skin and how it turned out on my mavic 2 pro. The skin came in a flat card board envelope which kept the decals from rolling. It feels like some type of weighty contact paper. It normally takes the shapes effectively, minor wrinkles can be pushed out quite effortless and it won’t set immediately so you can reposition if vital. I identified that the back again facet of a usual sharpie pen functions effectively for finding into some of the more challenging to access areas. I will say that the most difficult decal to spot was the bottom one as there is a great deal of holes for sensors and access ports that have to be accounted for. I would advise executing this a person about mid way via the overall process as that will give you ample experience with the skin to know how it functions but you haven’t put in a good deal of time but. Speaking of time it took me about an hour (about 50 minutes) from commence to complete and i would not endorse striving to hurry the approach. A good deal of the procedure is generating positive you get matters lined up. Make positive you are arms and the mavic are clean up in advance of you start off.

These skins have been simple to apply and glance good. They are quite forgiving in that i was able to peal them off and reapply until finally they were being just appropriate. With a very little patience i was ready to get a excellent look. I will definitely get additional of these whenever i come to feel like swapping out to a new motif.

Here’s why-easy to apply, no residue, smooth finish and great quality. Just make sure you clean your drone with water and micro fiber cloth and make sure drone is dry before applying skin. Also make sure your fingers are clean and not greasy. I totally recommend these skins there are so many to choose from.

Decal lady has a good item. I use my drone for industrial/residential authentic estate and this merchandise has held up incredibly. The drone has fallen out of the sky a pair instances and the vinyl decal has stayed on and secured the system. The only issue i would like is this kit came with two battery decals rather than one and that the 2pack battery decals came as a 3 pack as a substitute. A good deal of persons get the fly more kits for these drones which include 2 batteries so possessing that excess battery in both of people kits would support out a ton. I have released buddies of mine with drones to this solution and they have also bought and put in. Often with corners can come up, just make certain during the original method you use a warmth gun to get these corners to stick down. Do not get your drone as well sizzling. Just sizzling adequate for the adhesive to really consider hold. Also make positive you use isopropyl alcoholic beverages to wipe down the drone prior to install.

The vinyl is excellent quality 3m stuff. Fairly easy to apply with a little patience. My issue is with the pattern that i purchased initially, ‘exo neptune. ‘ the pictures in the item description show that the line on the design line up between each piece. This however, was not the case at all. Not like the pictures at all. Thankfully, amazon has been kind enough to refund my original purchase (can’t really return stickers ya know?) so that i can purchase a solid color scheme this time. Like i said, the materials and durability are great, just the pattern left something to be desired.

Summary
Review Date
Reviewed Item
Solid State Red Decal for Drone DJI Mavic Pro Kit - Includes Drone Skin, Controller Skin and 3 Battery Skins
Rating
4.4 / 5  stars, based on  361  reviews

1 Comment

  1. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    I’m very pleased with the cyberpunk stickers. First let me say that the precision of the stickers is just amazing, you will not find the sticker going 1mm longer than your drone, its just the exact fit. Quality is awesome, already took it for her first spin.
    1. I’m very pleased with the cyberpunk stickers. First let me say that the precision of the stickers is just amazing, you will not find the sticker going 1mm longer than your drone, its just the exact fit. Quality is awesome, already took it for her first spin.
      1. Fits pretty well considering how intricate and shapley the drone is. Some areas just didn’t like up properly no matter how slowly and meticulously i tried applying. I used hair dryer as suggested which helped. But weeks later i find stickers peeling in various areas. I have since gone over drone again with blow dryer to re apply. I hope this isn’t a reoccurring issue.
  2. Fits pretty well considering how intricate and shapley the drone is. Some areas just didn’t like up properly no matter how slowly and meticulously i tried applying. I used hair dryer as suggested which helped. But weeks later i find stickers peeling in various areas. I have since gone over drone again with blow dryer to re apply. I hope this isn’t a reoccurring issue.
  3. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    The product is not as vibrant green as it looks in the picture. I was looking for a true neon green which the picture looks like, but it is not.
  4. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    The product is not as vibrant green as it looks in the picture. I was looking for a true neon green which the picture looks like, but it is not.
    1. Creating a different look for your drone giving it a bit of uniqueness. Has stayed in place well so far.
      1. Creating a different look for your drone giving it a bit of uniqueness. Has stayed in place well so far.
  5. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    I ordered a skin last year for my first drone and it was close to perfect. But with this one, i’ve seen several places repeatedly peeling and just making it look like a hot mess. I’m giving it another 3 days and i’ll be asking for refund if it doesn’t get better.
  6. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    I ordered a skin last year for my first drone and it was close to perfect. But with this one, i’ve seen several places repeatedly peeling and just making it look like a hot mess. I’m giving it another 3 days and i’ll be asking for refund if it doesn’t get better.
  7. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    Time consuming to put it on but it is well worth it. Just be very careful putting your camera and gimbal cover on otherwise that part of the decal will get chewed up.
    1. Time consuming to put it on but it is well worth it. Just be very careful putting your camera and gimbal cover on otherwise that part of the decal will get chewed up.
      1. If you do not have experience, it may be difficult to make. When you paste the wrong you can remove and paste again. Some parts may not match especially propeller and top.
  8. If you do not have experience, it may be difficult to make. When you paste the wrong you can remove and paste again. Some parts may not match especially propeller and top.
  9. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    The video is sped up making it impossible to follow along.
  10. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    Nothing to complain: skin looks really great, seems to be of very good qualit (3m) and is easy to glue it on the mavic. Only it takes more than an hour because of a lot of elements that have to be fumbled on the copter. But don’t worry, the provided plan is very informative so it’s not really a challenge to get it done.
  11. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    Nothing to complain: skin looks really great, seems to be of very good qualit (3m) and is easy to glue it on the mavic. Only it takes more than an hour because of a lot of elements that have to be fumbled on the copter. But don’t worry, the provided plan is very informative so it’s not really a challenge to get it done.
    1. If you have a steady hand it will look really good. I would very highly recommend buying 2.
      1. If you have a steady hand it will look really good. I would very highly recommend buying 2.
  12. Looks like i thought it would, look for decal girl on youtube. Not hard to install just take your time.
    1. Looks like i thought it would, look for decal girl on youtube. Not hard to install just take your time.
      1. Dji makes great drones but the color leaves much to be desired. Now my drone looks really cool .
  13. Dji makes great drones but the color leaves much to be desired. Now my drone looks really cool .
  14. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    This set was easy to put on and came with detailed instructions. Product seems to be quality and i’m happy with my purchase.
  15. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    This set was easy to put on and came with detailed instructions. Product seems to be quality and i’m happy with my purchase.
  16. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    Decal adhesive is really weak. Two days after installtion decal started to peel off. I have prep the exterior surface per provided instruction. In addition, applied on new mavic, which was purchased the day before. On a plus side, the cut out is perfect on this product. Given the fact the adhesive glue is weak, i would not recommend this product********day 3decal at arm came loose. I have revised my rating from two star to one.
    1. Decal adhesive is really weak. Two days after installtion decal started to peel off. I have prep the exterior surface per provided instruction. In addition, applied on new mavic, which was purchased the day before. On a plus side, the cut out is perfect on this product. Given the fact the adhesive glue is weak, i would not recommend this product********day 3decal at arm came loose. I have revised my rating from two star to one.
      1. Installation takes time, but is fun. Needs to include 2 battery wrap (only get one so you have to purchase extra to match).
  17. Installation takes time, but is fun. Needs to include 2 battery wrap (only get one so you have to purchase extra to match).
  18. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    Buen producto y calidad de material la única pena que no hagan pegatina para el smart controller por lo demás lo recomiendo en cuanto a la durabilidad aun no puedo calificar porqué lo tengo hace poco.
    1. Buen producto y calidad de material la única pena que no hagan pegatina para el smart controller por lo demás lo recomiendo en cuanto a la durabilidad aun no puedo calificar porqué lo tengo hace poco.
  19. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    Decal girl has a great product. I use my drone for commercial/residential real estate and this product has held up amazingly. The drone has fallen out of the sky a couple times and the vinyl decal has stayed on and protected the body. The only thing i wish is this kit came with 2 battery decals rather than 1 and that the 2pack battery decals came as a 3 pack instead. A lot of people buy the fly more kits for these drones which include 2 batteries so having that extra battery in either of those kits would help out a lot. I have introduced buddies of mine with drones to this product and they have also bought and installed. Sometimes with corners can come up, just make sure during the initial process you use a heat gun to get these corners to stick down. Don’t get your drone too hot. Just hot enough for the adhesive to really take hold. Also make sure you use isopropyl alcohol to wipe down the drone prior to install.
  20. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    Decal girl has a great product. I use my drone for commercial/residential real estate and this product has held up amazingly. The drone has fallen out of the sky a couple times and the vinyl decal has stayed on and protected the body. The only thing i wish is this kit came with 2 battery decals rather than 1 and that the 2pack battery decals came as a 3 pack instead. A lot of people buy the fly more kits for these drones which include 2 batteries so having that extra battery in either of those kits would help out a lot. I have introduced buddies of mine with drones to this product and they have also bought and installed. Sometimes with corners can come up, just make sure during the initial process you use a heat gun to get these corners to stick down. Don’t get your drone too hot. Just hot enough for the adhesive to really take hold. Also make sure you use isopropyl alcohol to wipe down the drone prior to install.
  21. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    The exo neptune color is not as advertised, but not misleading on purpose. The colors are lot more dull and blue than aqua marine or turquoise, as you are led to believe from the pics. Don’t get me wrong, the drone still looks very cool with this design.
    1. The exo neptune color is not as advertised, but not misleading on purpose. The colors are lot more dull and blue than aqua marine or turquoise, as you are led to believe from the pics. Don’t get me wrong, the drone still looks very cool with this design.
      1. Quality of adhesive is not the best. Some areas just do not stick completely. If one of these skins come off in flight and impact your propellers, you will crash your drone. Luckily mine came off just prior to take-off and damage was minimal. At 50 feet of altitude it would have been catastrophic.
  22. Quality of adhesive is not the best. Some areas just do not stick completely. If one of these skins come off in flight and impact your propellers, you will crash your drone. Luckily mine came off just prior to take-off and damage was minimal. At 50 feet of altitude it would have been catastrophic.
    1. I have been browsing skins off and on for awhile now. This one really caught my eye, so i decided to bite. Glad i did because my mavic pro looks really cool now. It’s almost like having a real r2 unit by my side lol.
  23. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    I have been browsing skins off and on for awhile now. This one really caught my eye, so i decided to bite. Glad i did because my mavic pro looks really cool now. It’s almost like having a real r2 unit by my side lol.
    1. Spot on cuts, easy to peel and easy to apply. Great quality and affordable price. I would definitely recommend.
  24. This review is from : Solid State Red Decal for Drone DJI Mavic Pro Kit – Includes Drone Skin, Controller Skin and 3 Battery Skins

    Spot on cuts, easy to peel and easy to apply. Great quality and affordable price. I would definitely recommend.
    1. This skin makes my mavic pro look bad ass. Everyone that has seen it thinks so to.
      1. This skin makes my mavic pro look bad ass. Everyone that has seen it thinks so to.

Comments are closed.