Crazepony GEPRC GEP-LSX6 Frame X265 4mm Carbon Fiber FPV Frame : This is the highest quality frame I have purchased to

This is the highest quality frame i have purchased to date. High quality stiff carbon fiber, and precision machining throughout. Truly well thought out and the design is meticulously well executed. I have found my new go-to frame.

This is the very best believed out frame built of the finest high quality parts ive at any time applied for a build.

This may be the greatest frame i at any time utilised, i acquired the lx220 frame for the 5′ props and i loved it so significantly i acquired the lx6 frame so i can have one particular that operates 6′ props, the only thing i can say that is damaging is i wished it was just 5mm taller, its seriously tight making an attempt to healthy my electronics in there and not rub the frame. I built it operate but it wasn’t uncomplicated. I’m utilizing the tbs fpv eyesight with the new tbs 2in 1 esc’s and flight controller, it is tight but it will work. If it was just a number of mm taller it would be arms down the finest frame at any time. They need to also look at generating this in a stretched frame.

This was a reward and was excepted with excitement.

Excelent solution, quality, and quite good frame, very quick to create,.

This is the finest frame i’ve ever procured. Since it is stretched you might be able to go more quickly and hold altitude superior. I’ve crashed this going entire velocity and it didn’t even place a dent in it. Buy it and you will not be dissatisfied.

Crazepony GEPRC GEP-LSX6 Frame X265 4mm Carbon Fiber FPV Frame with Output 5v 3A and 12V 0.5A BEC PDB for Racing Drone QAV-X210 QAV-X250(Blue Eyes) (GEP-LSX6 Frame X265) (X255)

  • Make sure this fits
    by entering your model number.
  • Aviation aluminum 7075 high-precision CNC fuselage, very strong resistance to blast,and 3K high strength carbon board to ensure that the frame is strong.
  • “True X” Structure. Suitable for competition and Freestyle fancy flying
  • 13.5mm wide, 4mm thick arm design, small wind resistance coefficient;5 inch wheelbase 255mm, have wider air through
  • Two sets of cameras side panel, support HS1190 HS1170, Swift, ovf lens, etc;The camera is adjustable, 0 to 60 degrees
  • Come with a piece of PDB, take BEC output 5V 3 A and 12V 0.5A

Have it paired with racekraft 5046 gold glitter props and it flies good. Had it paired with dalprop 6′ props painted gold but paint flakes off when it hits objects (pilot mistake).

This carbin is extremely awesome wow. I want i experienced purchased this sooner.

Crazepony GEPRC GEP-LSX6 Frame X265 4mm Carbon Fiber FPV Frame with Output 5v 3A and 12V 0.5A BEC PDB for Racing Drone QAV-X210 QAV-X250(Blue Eyes) (GEP-LSX6 Frame X265) (X255) :

Summary
Review Date
Reviewed Item
Crazepony GEPRC GEP-LSX6 Frame X265 4mm Carbon Fiber FPV Frame with Output 5v 3A and 12V 0.5A BEC PDB for Racing Drone QAV-X210 QAV-X250(Blue Eyes) (GEP-LSX6 Frame X265) (X255)
Rating
4.1 / 5  stars, based on  10  reviews

1 Comment

  1. Great looking frame but broke on the first crash. In addition, if you plan on buying this frame, make sure your radio receiver and vtx are the smallest you can find; that the flight controller is an all in one; and the pdb has the lowest profile possible.
  2. This review is from : Crazepony GEPRC GEP-LSX6 Frame X265 4mm Carbon Fiber FPV Frame with Output 5v 3A and 12V 0.5A BEC PDB for Racing Drone QAV-X210 QAV-X250(Blue Eyes) (GEP-LSX6 Frame X265) (X255)

    Great looking frame but broke on the first crash. In addition, if you plan on buying this frame, make sure your radio receiver and vtx are the smallest you can find; that the flight controller is an all in one; and the pdb has the lowest profile possible.
  3. This review is from : Crazepony GEPRC GEP-LSX6 Frame X265 4mm Carbon Fiber FPV Frame with Output 5v 3A and 12V 0.5A BEC PDB for Racing Drone QAV-X210 QAV-X250(Blue Eyes) (GEP-LSX6 Frame X265) (X255)

    This carbin is very nice wow. I wish i had purchased this sooner.
  4. This review is from : Crazepony GEPRC GEP-LSX6 Frame X265 4mm Carbon Fiber FPV Frame with Output 5v 3A and 12V 0.5A BEC PDB for Racing Drone QAV-X210 QAV-X250(Blue Eyes) (GEP-LSX6 Frame X265) (X255)

    This is the best frame i’ve ever purchased. Because it’s stretched you’re able to go faster and hold altitude better. I’ve crashed this going full speed and it didn’t even put a dent in it. Buy it and you won’t be disappointed.
    1. This is the best frame i’ve ever purchased. Because it’s stretched you’re able to go faster and hold altitude better. I’ve crashed this going full speed and it didn’t even put a dent in it. Buy it and you won’t be disappointed.
  5. This review is from : Crazepony GEPRC GEP-LSX6 Frame X265 4mm Carbon Fiber FPV Frame with Output 5v 3A and 12V 0.5A BEC PDB for Racing Drone QAV-X210 QAV-X250(Blue Eyes) (GEP-LSX6 Frame X265) (X255)

    Have it paired with racekraft 5046 gold glitter props and it flies great. Had it paired with dalprop 6″ props painted gold but paint flakes off when it hits objects (pilot error).
    1. Have it paired with racekraft 5046 gold glitter props and it flies great. Had it paired with dalprop 6″ props painted gold but paint flakes off when it hits objects (pilot error).
  6. This review is from : Crazepony GEPRC GEP-LSX6 Frame X265 4mm Carbon Fiber FPV Frame with Output 5v 3A and 12V 0.5A BEC PDB for Racing Drone QAV-X210 QAV-X250(Blue Eyes) (GEP-LSX6 Frame X265) (X255)

    Excelent product, quality, and very nice frame, very easy to build,.
      1. This might be the best frame i ever used, i bought the lx220 frame for the 5″ props and i loved it so much i bought the lx6 frame so i can have one that runs 6″ props, the only thing i can say that is negative is i wished it was just 5mm taller, its really tight trying to fit my electronics in there and not rub the frame. I made it work but it wasn’t easy. I’m using the tbs fpv vision with the new tbs 2in 1 esc’s and flight controller, it is tight but it works. If it was just a few mm taller it would be hands down the best frame ever. They should also consider making this in a stretched frame.
  7. This might be the best frame i ever used, i bought the lx220 frame for the 5″ props and i loved it so much i bought the lx6 frame so i can have one that runs 6″ props, the only thing i can say that is negative is i wished it was just 5mm taller, its really tight trying to fit my electronics in there and not rub the frame. I made it work but it wasn’t easy. I’m using the tbs fpv vision with the new tbs 2in 1 esc’s and flight controller, it is tight but it works. If it was just a few mm taller it would be hands down the best frame ever. They should also consider making this in a stretched frame.
  8. This review is from : Crazepony GEPRC GEP-LSX6 Frame X265 4mm Carbon Fiber FPV Frame with Output 5v 3A and 12V 0.5A BEC PDB for Racing Drone QAV-X210 QAV-X250(Blue Eyes) (GEP-LSX6 Frame X265) (X255)

    This is the best thought out frame made of the finest quality parts ive ever used for a build.
  9. This review is from : Crazepony GEPRC GEP-LSX6 Frame X265 4mm Carbon Fiber FPV Frame with Output 5v 3A and 12V 0.5A BEC PDB for Racing Drone QAV-X210 QAV-X250(Blue Eyes) (GEP-LSX6 Frame X265) (X255)

    This is the best thought out frame made of the finest quality parts ive ever used for a build.

Comments are closed.