BETAFPV 2pcs Beta75 Pro Micro Brushless Whoop Upgraded Frame : Great Frame for any 75mm Brushless Whoop – Perfect Mobula7 Frame Replacement!

Light pounds frame for brushless motors.

Purchased it for betafpv 75pro and labored completely.

Worked good for a beta75 pro make that i did from betafpv elements purchased on amazon. My beloved seventy five mm brushless quad. Frame has held up pretty very well.

The frame arrived in great form. It really is only 5 grams, it should really make a excellent flier.

This frame is genuinely hard looking at that it is only 5. I initial made use of this frame in the beat75 pro. I required much more power, so i then modded it to start making 2s whoops (in advance of the beta75x arrived out). If you reduce the bottom of the battery tray, a 300mah 2s battery will in good shape properly in that slot. Then just include a velcro cable tie to hold the battery in. In a crash, they bend and bounce but usually really don’t crack.

This frame is the excellent alternative for the mobula7’s incredibly fragile frame. I would endorse it to any individual that wishes a significantly more robust frame for their mobula7. It is also great for making your very own 75mm brushless whoop. My good friends and i designed the first ‘2s electric power whoops’ on an previously edition of this frame. Now this v3 model it has motor mounts great for 0802 brushless motors and 40mm props will make it an incredible 2s whoop. The v3 frame also has duct tabs to help shield your props. The frame holds a wide variety of batteries and can be used for 2x1s stick batteries with a straightforward battery holder as well. I really advise you construct a 2s whoop with this frame bring about they are ridiculously pleasurable to fly.

BETAFPV 2pcs Beta75 Pro Micro Brushless Whoop Upgraded Frame for 0703 or 0603 Brushless Motor Tiny Whoop

  • This Beta75 pro frame could fit for 0703 motors of Betafpv, Sunsky, Happy Model and Racerstar, also fit 0603 motors of Racerstar and Boldclash.
  • Upgraded: Battery jar and motor holes are improved, and four braces are added to protect props from being damaged.
  • Propellers: 40mm 4-blade props (No including)- https://www.amazon.com/dp/B07B2P7TF4
  • Motors: 0703 brushless motors (No including)- https://www.amazon.com/dp/B078N93QVP
  • Batteries: 550mAh 1S Lipo HV batteries -https://www.amazon.com/dp/B078WR2FVR

Beta fpv has some of the greatest micro gear on the market. As constantly they came by way of with great tailor made paint on their presently great frames. You are unable to pass up on any of their gear. Be it batteries, frames, bnf micro fpv drones and and so on.

A excellent mobula7 frame update, hasn’t damaged soon after numerous difficult crashes.

This looks to be a great tiny frame. Transferred all the sections from the snapper 7 more than to this frame. Only slight mods ended up desired. Took off 3 grams as opposed to the aluminum frame. Flew it indoors with some tough crashes and it held up excellent so much.

Tremendous strong frame for your whoop build good package of two frames so you can have a back again up frame or establish 2 whoops.

I acquired it to exchange a damaged mobula seven frame. The flight controller standoffs are as well quick for the mobula seven canopy. M2 spacers employed with quite extensive nylon screws to maintain cover in location. Other than that the flight controller sits practically flawlessly.

This frame can just take a beating. Definite upgrade from my stock mobula7 frames. I have switched each of my mobula7’s to this frame.

This is an outstanding substitute frame for the mobula seven. 35 grams which is nearly a 50 % gram a lot less then the v3 frame. I would say that this frame is lots potent with no sacrificing fly capability.

The packaging these appear in squeezes the ducts into an egg form. It really is only about 4mm change in diameter, but it’s even now noticeable and looks kinda terrible. I envision it could have a detrimental have an impact on on flight properties also, whether it be the angle of the motor mounts or a limited fitting prop scraping(i. Just waiting around on the motors to finish this build. I will update afterwards on if which is the case, or if they straighten out to an real circle as a substitute of an oval. Flexing them by hand won’t look to resolve it considerably. It’s possible applying some heat could support, i will not know. For $nine i would assume they’d be packaged greater, but at minimum they really feel rather resilient.

Particularly what i essential for my micro develop.

Advert suggests brushless frame gained a brushed frame. These issues transpire, straightforward slip-up. Amazon was quite quick to refund my money having said that. Edit: betafpv has contacted me specifically and went over and beyond to make this suitable for me. I will surely operate with them once again in the potential and am on the lookout into having one particular of their new 2s whoops.

I would recommend it to any person.

BETAFPV 2pcs Beta75 Pro Micro Brushless Whoop Upgraded Frame for 0703 or 0603 Brushless Motor Tiny Whoop : Arived in perfect shape, no correction was needed. Will be used to replace an aluminum frame.

Place my brushless whoop with each other a couple weeks in the past, it is fast. This frame is rigid still flexable more than enough to take a challenging crash without having deforming. Happy i have the next frame, do not know how extended it will be right until i need it however as this a person is keeping up great so far. I may well have to build a 2s whoop with this frame.

Straightforward to switch between if a person will get broken.

0703 19kkv with this frame are the way to go frame is powerful sufficient to very last a number of crashed im guaranteed retains the 600mah and 550mah lihv snugly and not have them slip around2 frames comes with the little squishy items and some screws to mount the fc not a lot additional to say about this other than get it its superior and stuff.

Summary
Review Date
Reviewed Item
BETAFPV 2pcs Beta75 Pro Micro Brushless Whoop Upgraded Frame for 0703 or 0603 Brushless Motor Tiny Whoop
Rating
4.8 / 5  stars, based on  30  reviews

1 Comment

  1. This review is from : BETAFPV 2pcs Beta75 Pro Micro Brushless Whoop Upgraded Frame for 0703 or 0603 Brushless Motor Tiny Whoop

    Had to fix the holes on the frames for the motors. Both frames arrived like that. Everything i order from betafpv ends up being junk.
  2. This review is from : BETAFPV 2pcs Beta75 Pro Micro Brushless Whoop Upgraded Frame for 0703 or 0603 Brushless Motor Tiny Whoop

    Had to fix the holes on the frames for the motors. Both frames arrived like that. Everything i order from betafpv ends up being junk.
    1. Very stong and durable frames i replaced the mobula7 v1 frame for this one and was very pleased with shipping and the quality.
      1. Very stong and durable frames i replaced the mobula7 v1 frame for this one and was very pleased with shipping and the quality.
  3. This is an excellent replacement frame for the mobula 7. 35 grams which is almost a half gram less then the v3 frame. I would say that this frame is plenty strong without sacrificing fly ability.
  4. This review is from : BETAFPV 2pcs Beta75 Pro Micro Brushless Whoop Upgraded Frame for 0703 or 0603 Brushless Motor Tiny Whoop

    This is an excellent replacement frame for the mobula 7. 35 grams which is almost a half gram less then the v3 frame. I would say that this frame is plenty strong without sacrificing fly ability.
    1. Put my brushless whoop together a couple weeks ago, it is fast. This frame is stiff yet flexable enough to take a hard crash without deforming. Glad i have the second frame, don’t know how long it will be until i need it though as this one is holding up great so far. I may have to build a 2s whoop with this frame.
      1. Put my brushless whoop together a couple weeks ago, it is fast. This frame is stiff yet flexable enough to take a hard crash without deforming. Glad i have the second frame, don’t know how long it will be until i need it though as this one is holding up great so far. I may have to build a 2s whoop with this frame.
  5. This seems to be a great little frame. Transferred all the parts from the snapper 7 over to this frame. Only slight mods were needed. Took off 3 grams compared to the aluminum frame. Flew it indoors with some hard crashes and it held up great so far.
    1. This seems to be a great little frame. Transferred all the parts from the snapper 7 over to this frame. Only slight mods were needed. Took off 3 grams compared to the aluminum frame. Flew it indoors with some hard crashes and it held up great so far.

Comments are closed.