Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories : Excellent light hood for the Mavic 2 Pro.

Product or service matches the dji mavic professional very very well which is a substantial pro in my book for this supplier. I can verify that it is very difficult to make this camera hood clearly show in-frame. I’m chatting sturdy headwind and full throttle in activity mode, seeing the props before the hood type of difficult. So i can say i am extremely content with the efficiency of the hood, i am 98% of the time in gps or cenima mode so i by no means have any concerns. You fellas looking to improve your pictures with no obstruction this is the one you want. The cause for the four starthe hood suits and performs specifically as described, but i counted off a star owing to the fitment when on the drone by itself. The hood installs just as you would set up the gimbal protector, which was an ingenious thought of employing prexisting slots. Although the hood had no enjoy in fitment transferring ahead and backwards in relation to the drone, lateral or remaining and appropriate fitment is quite free. I’m not absolutely sure how this will engage in out above time if nearly anything at all need to come about, but i do have my individual personal concerns with it. I never want it fibrating on the drone, as all homeowners know they are pretty delicate to overseas vibrations and i really don’t want it stractchng up any surfaces, concealed or not.

Suits properly if you bend it a tiny to make it tighter. Does a first rate occupation of shading the camera from the sides. Will not seem to be to lead to and flight challenges. The only complaint i have is that is does get into the body on the sides when using online video and moving the drone. The connected picture was clipped from a video i was taking. I was gently strafing correct, subsequent my neighbor walking, and then i enable go of the stick. As the drone braked and tilted the reverse way, the protect acquired in there rather noticeably(see left facet of hooked up picture). It does not demonstrate up in visuals though transferring the camera up/down when the drone is idle hovering.

It is a minimal unfastened when mounted, and a little bump will just take it out. Excellent shade safety, but does not safeguard gimbal from bumps and hits mainly because of that.

Really respectable but isnt just how it seems. When in activity method and flicking drone all around, the shade is shown a tiny bit.

Would seem like a superior way to support with glare in addition to some filters i obtained to make points even greater.

Studying up immediately after on other matters, a decent amount of money of individuals go with out it. I haven’t been droning extensive, so i can not say how a lot of a change it would make.

Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

  • Make sure this fits
    by entering your model number.
  • ESSENTIAL MAVIC 2 ACCESSORY: Reduce sun glare / vignetting effect when you taking photos with your DJI Mavic 2 Pro / Mavic 2 Zoom, help you shoot professional quality images and videos
  • EXTRA PHYSICAL PROTECTIONS: Protect your fragile gimbal whenever there should be a collision
  • EXPANDED OPENING WITH RIGHT ANGLE: Wider camera view; Allows a moderate amount of light to come in and also allows air to flow smoothly to cool things down
  • INJECTION MOLDED: Unlike many other lens hoods made by 3D printer, cheap but not satisfying, the Arzroic Lens hood is injection molded
  • TRULY LIGHTWEIGHT: Only weight 0.46oz / 0.028lb

Ahead of buying this i often experienced the most difficult time framing my aerial shots do to all the glare. This issue has been a lifesaver, it definitely allows to clear up any aerial images. Actually for the value you won’t be able to afford to pay for not to.

Great fit, really wonderful quality and swift store. Would order once again from this organization for my mavic pro. Wonderful sunshade as we will as a gimbal defense. Ideal in good shape, colour, and quickly transport. Actually operates perfectly down below.

Matches completely and it is a superior piece of thoughts figuring out that my gimbal is safeguarded,aslo appears like it will come atash to the drone.

Only have experienced an chance to use it on 1 flight. Still analyzing its usefulness but over-all simplicity of use & excellent are great.

Pretty easy to use but will work wonderful. Fit is quite good and does not influence camera or discipline of view. Blocks people troublesome sun glares that wreck a shot and keeps rotor shadows in look at.

Offers superb protection from immediate daylight in most angle shots. Mixed with the appropriate filters, gives great video results.

Blocks the sun really nicely and stays out of the shot when getting photo or videoing. Quick to assemble and matches pretty very easily into my mavic scenario.

Functions better than the orginal defend. You never see it in the camera edges as you could with the orginal defend.

Examined today in extremely windy and overcast situations. Never observed props or vignetting in 360 tripod mode. I will leave this hood on at all periods to secure the gimbal in storage/vacation as perfectly as a sun shade. I have beeb traveling dji quads for a few yrs and now adore my mavic professional platinum.

I use the before design all the time and have saved my gimbal on a few of rough landings. I got this ‘improved’ hood and observed a great deal of issues i like and it does a improved occupation of blocking sun flares. The snap-on- snap-off depth is unfastened and i concern it will not stay on when. I will use the ‘improved’ a person right up until it falls off. And lastly, i will do some insignificant modifications to make the latch far more safe.

The lens hood is effective precisely as advertised. The shade lowers lens flare in most ailments, as very well as supplying a diploma of aspect defense. Really light-weight, but seems strong. Very well built, and they in good shape properly. They also do not block the airflow vents at the rear of the gimbal, compared with the very clear inventory dome. The temperature of the mavic professional appears to get considerably hotter if these vents are blocked, so i only use the crystal clear dome when packing up and touring, or all those scarce times i’ve taken it up in a mild rain (likely not a great plan, though i have experienced no troubles).

Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom : Had to heat up to modify, as it would not stay connected to my mavic pro platinum.

This item suits properly, it protects the gimbal camera and also blocks the sun even though traveling from the sides.

At very last they did some thing distinctive that i had been waiting for some time, the layout is superior but it has a tiny defect, the aspect of the clip the place it is fixed next to the air flow grille of the drone is scarcely fixed, there are numerous odds that tumble, thanks to my awareness of engineering to correct that fault i warmed that aspect of the clip a bit and bent it much more outwards like an eighth of an inch and now it fastens with power without dread of getting rid of the hood, the maker should really have that in account, mainly because i have read through some reviews of personanque have misplaced the hood thanks to this failure of manufacture.

General product or service has been excellent have utilised it on flights exactly where i need to defend lens from side sun. Only concern have had is what should have been a clearance issue recieved a gimbal mistake information. Taken off the cover for that flight and reset gimbal all was alright. Have applied cover in subsequent flights without the need of challenge so may have been how i set up the cover for that certain flight.

Little adequate to in good shape in the mavic pro bag that cubes with the fly a lot more package.

Shield and minimizes lens flare.

When these are on the aircraft (mp2) there is no way to secure the stock gimbal protector. The slots to secure the protector are taken up by the hood. The hood does assist in protecting the cam/gimbal in minor crashes. For that, its indispensable.

This item is nicely produced a suits the mavic petfectly. It doesnt interfere with gimbal rotation and doesnt arrive in watch of camera when filming. It also helps make the mavic look cooler, in my impression. It doesnt however supply on blocking the sun from evident on the camera. I see tiny big difference with it truthfully. Blocks some but not as marketed.

The sun shade works as described. My only problem is that when it truly is attached to the mavic professional, the match isn’t really as tight as i’d like it to be. Could quite possibly vibrate loose and slide off all through flight.

I have not made use of in all through a flight nevertheless but based mostly on the way it fit, it will function correctly.

Pretty astonished with this products. Inspite of the adverse assessments by some, and a veryreasonable rate this “lens hood” for the m2p. Matches easily and so far i’ve knowledgeable no rattle or in shape issues.

Nice sun shade that doesn’t get in the body of the camera’s shot. Notice: you simply cannot have the protective plastic cover and the sun shade on at the very same time, it makes use of the cover’s mount. So when you shop the drone, you ought to just take the shade off.

Enjoy this hood, allows with aperture and evening time extensive publicity. Just one difficulty on 360 pano the hood receives in the way.

Summary
Review Date
Reviewed Item
Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom
Rating
4.5 / 5  stars, based on  109  reviews

1 Comment

  1. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    Only have had an opportunity to use it on one flight. Still evaluating its effectiveness but overall ease of use & quality are good.
  2. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    Only have had an opportunity to use it on one flight. Still evaluating its effectiveness but overall ease of use & quality are good.
    1. Overall product has been good have used it on flights where i need to protect lens from side sun. Only issue have had is what must have been a clearance issue recieved a gimbal error message. Removed the cover for that flight and reset gimbal all was ok. Have used cover in subsequent flights without issue so might have been how i installed the cover for that particular flight.
  3. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    Overall product has been good have used it on flights where i need to protect lens from side sun. Only issue have had is what must have been a clearance issue recieved a gimbal error message. Removed the cover for that flight and reset gimbal all was ok. Have used cover in subsequent flights without issue so might have been how i installed the cover for that particular flight.
    1. My mavic 2 pro lost 2 of them. If you can attach your protective gimbal cover you can attach this lens protector. I’ve lost two, the bird just comes home without them.
  4. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    My mavic 2 pro lost 2 of them. If you can attach your protective gimbal cover you can attach this lens protector. I’ve lost two, the bird just comes home without them.
  5. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    I loved the concept bit from a light blocker and a gimble protector. Installed easy and i could just leave it on. Unfortunately, it messed up the focus both camera and video. I was shooting an evening wedding and was rushed switching from the nikon and the mavic. Got it airborne and it looked a little fuzzy on the ipad screen but didn’t have time to diagnose so i just continued to take pictures and video. When i downloaded, sure enough, everything was a bit fuzzy. I just spent some time trying to solve the issue. I tried multiple software flying programs, made sure everything was clean, checked all the settings, and cycled between manual and autofocus. Then i realized the only thing different was the lens hood. I removed it and everything was perfect and back to normal.
    1. I loved the concept bit from a light blocker and a gimble protector. Installed easy and i could just leave it on. Unfortunately, it messed up the focus both camera and video. I was shooting an evening wedding and was rushed switching from the nikon and the mavic. Got it airborne and it looked a little fuzzy on the ipad screen but didn’t have time to diagnose so i just continued to take pictures and video. When i downloaded, sure enough, everything was a bit fuzzy. I just spent some time trying to solve the issue. I tried multiple software flying programs, made sure everything was clean, checked all the settings, and cycled between manual and autofocus. Then i realized the only thing different was the lens hood. I removed it and everything was perfect and back to normal.
      1. Fits perfectly and it is a good piece of mind knowing that my gimbal is protected,aslo looks like it comes atash to the drone.
  6. Fits perfectly and it is a good piece of mind knowing that my gimbal is protected,aslo looks like it comes atash to the drone.
    1. . But its very loose after just one flight. Pgytech make a shield for just a couple of dollars more thats much more tight fitting than this.
      1. . But its very loose after just one flight. Pgytech make a shield for just a couple of dollars more thats much more tight fitting than this.
  7. This item fits perfectly, it protects the gimbal camera and also blocks the sun while flying from the sides.
    1. This item fits perfectly, it protects the gimbal camera and also blocks the sun while flying from the sides.
  8. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    Provides excellent protection from direct sunlight in most angle shots. Combined with the right filters, gives perfect video results.
    1. Provides excellent protection from direct sunlight in most angle shots. Combined with the right filters, gives perfect video results.
      1. Works well to reduce those pesky rays and glare across the lens that i tend to discover in my “epic” footage when i get home.
  9. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    Works well to reduce those pesky rays and glare across the lens that i tend to discover in my “epic” footage when i get home.
  10. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    So far i’m happy with the purchase of the lens hood. Others have said theirs came loose and or restricted the gimbal during preflight check. I’m sure that qc comes into play here and the hood that i received may have been just the luck of the draw. That being said after installing and checking there was no extra play in the connection, didn’t impede the gimbal, and even more importantly wasn’t in any direct view of the lens at any time during my flights. The package it came in was nothing special, just a box with no padding or containment for the lens hood to keep it secure and or safe. Mine did arrive in the same box as another item i ordered at the same that did have extra padding chips. All in all, for the price of this little accessory, i’m happy with what i got. I will update later on if one of the clips break prematurely or something else comes up.
  11. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    So far i’m happy with the purchase of the lens hood. Others have said theirs came loose and or restricted the gimbal during preflight check. I’m sure that qc comes into play here and the hood that i received may have been just the luck of the draw. That being said after installing and checking there was no extra play in the connection, didn’t impede the gimbal, and even more importantly wasn’t in any direct view of the lens at any time during my flights. The package it came in was nothing special, just a box with no padding or containment for the lens hood to keep it secure and or safe. Mine did arrive in the same box as another item i ordered at the same that did have extra padding chips. All in all, for the price of this little accessory, i’m happy with what i got. I will update later on if one of the clips break prematurely or something else comes up.
  12. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    It is a little loose when mounted, and a small bump will take it out. Good shade protection, but does not protect gimbal from bumps and hits because of that.
    1. It is a little loose when mounted, and a small bump will take it out. Good shade protection, but does not protect gimbal from bumps and hits because of that.
      1. Aerodynamic, does not obstruct cooling as other offered does.
    1. Seems like a better way to help with glare in addition to some filters i got to make things even better.
  13. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    Seems like a better way to help with glare in addition to some filters i got to make things even better.
  14. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    I wanted this to be great, but it isn’t. It shows up in the footage too often. Since it isn’t connected to the camera, any time you really start to push the drone, you see the hood enter the frame.
    1. I wanted this to be great, but it isn’t. It shows up in the footage too often. Since it isn’t connected to the camera, any time you really start to push the drone, you see the hood enter the frame.
  15. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    Small enough to fit in the mavic pro bag that cubes with the fly more kit.
    1. Small enough to fit in the mavic pro bag that cubes with the fly more kit.
  16. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    Before buying this i always had the hardest time framing my aerial shots do to all the glare. This thing has been a lifesaver, it really helps to clean up any aerial photography. Honestly for the price you can’t afford not to.
  17. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    Before buying this i always had the hardest time framing my aerial shots do to all the glare. This thing has been a lifesaver, it really helps to clean up any aerial photography. Honestly for the price you can’t afford not to.
    1. Quite surprised with this product. Despite the negative reviews by some, and a veryreasonable price this “lens hood” for the m2p. Fits easily and so far i’ve experienced no rattle or fit issues.
  18. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    Quite surprised with this product. Despite the negative reviews by some, and a veryreasonable price this “lens hood” for the m2p. Fits easily and so far i’ve experienced no rattle or fit issues.
    1. Excellent glare protection, should have been part of the drone kit.
      1. Excellent glare protection, should have been part of the drone kit.
  19. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    Don’t use it much, more trouble than it’s worth to install on every flight.
  20. This review is from : Arzroic Mavic 2 Lens Hood Sun Shade Gimbal Protector Cover Camera Lens Cover Guard Accessories for DJI Mavic 2 Pro/Zoom

    This product is well made a fits the mavic petfectly. It doesnt interfere with gimbal rotation and doesnt come in view of camera when filming. It also makes the mavic look cooler, in my opinion. It doesnt however deliver on blocking the sun from glaring on the camera. I see little difference with it honestly. Blocks some but not as advertised.

Comments are closed.