ACROTOR Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder – Flying a drone made easy

I had picked this adapter from many cheap to expensive competitors. I weighed the bad reviews against my proposed use and discounted those that did not fall into my category. I picked this one as it was the best choice price point for my mavic pro using an ipad mini. Once the unit arrived, i discovered the many more ways i could mount the holder. It is much more versatile than any of the others i reviewed. Just for a test, i did put an original ipad on the mount, and as expected from the reviews, it did not stay in place. I could have tightened the knuckles, but that was not my intention as it works great for my purposes. I did give it only 4 stars purely based upon the claim it makes to hold the larger ipads. It is a 5-star unit for my purposes though.

Work nicely you may notice a little bit of shaking where the front of the mount meets the remote i added a small piece of padding right there and immediately solved the problem.

When i adjusted the joints to the positions i needed and tighten it up it is superb & would suggest it without reservation. I had a plastic holder ahead of and it just doesn’t assess to this a single.

I use this product or service to hold a entire measurement ipad on the controller to my mavic pro. General i like the mount, but there are a few factors to be informed of. To start with the way the mount is designed if you happen to be employing an ipad tablet you will not be capable to see the lcd on the controller. To start with the arm for the mount goes proper up in the center of the liquid crystal display screen. But moreover, with the ipad moved up significantly enough that you can see the screen, it is so unbalanced it truly is generally striving to get out of your hand. . When you set the display down further more where by it really is far better balanced and usable. You are not able to see the controller at all your fingers are underneath the ipad. . Feels a bit clumsy at times but it does perform properly. The unit compacts down properly to fit in a cramped circumstance. The unit is exceptionally strong made of equipment aluminum.

Pleasant ipad holder for the mavic air. Experienced to tighten the joints to reduce the jointed arm from sagging. Can reverse holder for an iphone if needed.

Only down fault i have identified, the small black caps are missing 🙁 effectively 2 of them are, i truly believe that this was ideal selection for me. Wanted to get longer cable , i could use the more compact one but had to lay the pad down practically flat and fewer than one/four inch from controller. Cant go wrong, caps should really be far better or probably ship what you ought to with it.

  • I LIKEY!

  • Flying a drone made easy

  • Versatile stand!

Some of the evaluations of this stand are not pretty complimentary, but i made a decision to take a possibility on it in any case. The aluminum base is superbly crafted, the pivoting arms are durable and have plenty of friction to retain their place, and even the plastic bracket that grips the telephone or pad is sturdy and well designed. It was not crystal clear in the description, but the bracket has two sides, just one for smaller cellphone sized units, the other for much larger points like ipads, so it performs with a vast variety of equipment. The guidelines that came with it are properly illustrated, but the pamphlet is compact building it challenging to study. But the only authentic assembly is to attach the plastic bracket to the leading of the pivoting arm, which is the concentration of a lot of grievances. I was not able to get the very little screw tight ample to hold the bracket from twisting when i only utilized my fingers to tighten it. So i took it out into the store, discovered a rather significant screwdriver that healthy the slot, and dabbed a very little thread locker on the screw before striving once more. This time, the bracket was held tightly in spot and hasn’t moved given that. I acquired this stand to use with an apple ipad mini four that i retain inside a griffin survivor all-terrain case, and the combo performs correctly alongside one another. I was apprehensive that the bracket wouldn’t hold tightly adequate, or would not distribute significantly enough, to accommodate the circumstance, but neither is a issue.

Switching from plastic to an aluminum holder content is so a great deal much better. This aluminum tablet holder is stronger and sturdier than my plastic one. I’m shocked at how light-weight it is. My tablet stays on secured and properly equilibrium. It was some what hard hoping to figured out how to place it with each other.

I purchased this tablet stand for my young children. Youngsters have been watching the ipads as well shut and i desired them to sit further away when they use the ipads to watch youtube. This stand is pretty strong and has fantastic pounds. The joints are very sturdy and calls for a good deal of pressure to bend. The stand holds its situation pretty effectively. It comes with a neck strap for gaming. I like that it folds neatly when not in use.

This is a seriously amazing versatile stand. I was seeking for some thing that could maintain up my 10′ tablet and decided on this just one. It was basic to established up and modify to obtain the excellent viewing angle. I also like how it will come with the neck lanyard and has the opening on the foundation to have.

This solution makes traveling my drone so a great deal a lot easier and obtainable. Would really suggest this for any drone pilot. Quite nicely designed and straightforward to set up.

Features of Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

  • Make sure this fits
    by entering your model number.
  • [Aluminum Alloy Bracket] Make of Aluminum and high-quality ABS material Perfect fit with DJI Mavic Air / Mavic Pro / Mavic/ DJI Spark Remote Controller
  • [Clever Design] Foldable design for convenient storage with adjustable view angle according to personal needs
  • [Multiple Applications]For smartphone stretchable length: about 54-83mm ,Suitable forFor No More Than 3.2 Inch Width Smartphone;For tablet stretchable length: about 110-190mm ,suitable for For No More Than 7.3inch Width Tablet/iPad;Compatible with iPhone X/8/7/6 iPad mini iPad 2/3/4, Samsung Galaxy Tab A 8″and so on.
  • [Additional Functions]Using as normal table holder and enjoy your time with large screen tablet,it is also suitable for Crystal Sky Monitor
  • [Hollow-carved Design] Light weight could be convenient for your operation
ACROTOR

Specifications: Material: Aluminum and high-quality ABS Size: 20.0 * 10.0 * 7.0 cm Weight:0.4kg Color:Black and Red

Compatible: Mavic Air/Mavic Pro/ Mavic Mini / Mavic 2 / Zoom / DJI Spark

Aluminum Foldable Tablet Stand Holder for Aluminum Foldable Tablet Stand Holder

Foldable Aluminum Tablet Mount Extender Holder

Aluminum Alloy Bracket Foldable Design for Convenient Storage Stable Support No Shaking

CNC Proccessing Anodizing Treatment

Arc Design Fitting Remote Controller

Q:Does this work with 12.9″ iPad Pro?

A:No,it just For No More Than 7.3inch Width Tablet/iPad Q:Will this hold a samsung galaxy note 8?

A:Yes,it can hold the note 8

Q::Will this work with an iPad Air 2?

A:Yes,it can hold the iPad Air 2

Clever Design

Haollow-carved design

Foldable Design

CNC Design

Hollow-carved Design

Reduce weight

Easy to hold and play

Foldable Design

Foldable design for convenient storage

Aluminum alloy bracket

Stable support and no shaking

CNC Processing

CNC processing

Anodizing treatment

Adjustable Angle

Adjustable View Angle

Adjust the angle according to personal needs

Multiple applications

Multiple applications

For Smartphone: the stretcable length is about 54mm – 83mm

For Tablet : the stretcable length is about 110mm – 190mm

Additional function

Additional Function

Enjoyable function

Using as normal tablet holder

Enjoy your time with large screen tablet

Make sure this fits
by entering your model number.

Perfect for my spark drone and ipad mini. Adjustable for both of those myself and my husband’s viewing choice. I basically switch the ipad holder aspect upside down for the reason that i like the viewing angle much reduce than ‘right facet up’. My spouse nonetheless prefers a additional vertical orientation so adjusts it appropriately. Straightforward to regulate, an totally ideal tablet holder for the drone. On the downside, 1 of the strap clips slipped the spring so propose that you look at the clips with each individual use just in scenario it fails. Another suggestion is that you fork out the more and buy the primary version from this exact same seller except if you will not care how speedy the shipping is.

I like the way it is designed. It undoubtedly is machined with precision.

I have a huge phone and an ipad mini4. They each in shape effortlessly into the cradle supplied. Robust and strong, but pretty light. Would absolutely obtain this once again. The only down side is that to screw the phone side of the cradle in is a very little hard to get your fingers in there. Terrific solution for what i wanted.

I use this with the mavic professional 2 and my ipad 4 mini. Very reliable designed and does not increase substantially bodyweight to my device. Most other holders i looked at were being produced of a plastic substance.

I ordered this product based on reviews of the quality and though it supported multiple devices, i was primarily interested in the support for crystalsky. The first unit i received would not tighten down on the crystalsky mount. See photo, there was an 1/8 inch gap and the mount just swung around. Because the screw wouldn’t come out of the base, i saw no way to modify this unit so i returned it for a replacement. The second unit also had the same problem. The difference with this unit is that the screw would come out of the base which allowed me to add 2 1/4 washers and 1 nylon washer that removed the gap and allowed the mount to tighten down firmly. Because of this i can only give 4 stars. Everything else worked as it was supposed to and the overall quality was acceptable and feels like it will last for a long time. I also liked the included lanyard and they way it connects, really nice feature i will be using a lot. I think the screw needs to be reviewed as it is too long to work properly with the crystalsky mount.

My to start with purchase of any type of mount and i am glad i went with the aluminium red. At initial, i thought the joints were being locked in. But following mounting the ipad to it, it turned distinct why the joints have been as rigid as they have been. I feel tightening the nut is greater than tightening from the bolt, just declaring.I located it much easier to put the prime of the ipad on the mount to start with and permit the ipad press up on the spring until eventually the bottom of the ipad is seated. This assistance lower around extending the spring. I can nevertheless adjust the ipad (forward or back) as essential to stability it the way i want it prior to traveling. The resources and the excess caps it arrives with is a reward. The lanyard sense delicate and at ease. I’ve used futaba and spektrum rc controllers in the previous and managing drones in fpv is fully a new rush.

[Aluminum Alloy Bracket] Make of Aluminum and high-quality ABS material Perfect fit with DJI Mavic Air / Mavic Pro / Mavic/ DJI Spark Remote Controller

Yesterday had this product out with my ipad when traveling my brand name new mavic pro 2. Although the mavic was traveling previously mentioned some trees in hyperlapse waypoint method, the neck strap suddenly broke and the ipad and controller fell. I experienced the controller in my still left hand as it swung down and absent and the ipad popped off the holder however hooked up by its wired connector. As i gripped the controller with my still left hand my hand pushed the still left command stick all the way forward (down) and the mavic descended into the trees. It is really security sensors went into alarm and stopped it from relocating any further more into danger even though i grabbed the ipad with my ideal hand and just stood there holding the controller and ipad away from my overall body to maintain the mavic where by it was. I very gently tucked the ipad underneath my arm and introduced the controller up and begun searching for the mavic. With alarms blaring i walked around to the trees and there it was hovering patiently in the tress waiting around for me to rescue it. I flew it out of the trees and back to the landing space and received it down devoid of incident, then sat on the back of my suv and took a couple of deep breaths while hunting at the strap. The correct-hand clasp experienced pulled proper by the buckle, which experienced a malformed – and cheaply made – little round spot to hold the clasp fitting, which is formed like a rivet. In addition, the spring-based mostly clamp to hold the ipad was not close to sturdy sufficient to keep the ipad air i have.

Tremendous strong and properly-developed. I can use this with my total-sizing ipad and it retains it properly. It lasts something on amazon is constructed decently.

[Clever Design] Foldable design for convenient storage with adjustable view angle according to personal needs

[Multiple Applications]For smartphone stretchable length: about 54-83mm ,Suitable forFor No More Than 3.2 Inch Width Smartphone;For tablet stretchable length: about 110-190mm ,suitable for For No More Than 7.3inch Width Tablet/iPad;Compatible with iPhone X/8/7/6 iPad mini iPad 2/3/4, Samsung Galaxy Tab A 8″and so on.

[Additional Functions]Using as normal table holder and enjoy your time with large screen tablet,it is also suitable for Crystal Sky Monitor

Summary
Review Date
Reviewed Item
Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller
Rating
4.6 / 5  stars, based on  81  reviews

1 Comment

  1. Seems like a study light weight holder – too bad it will not work with the crystal sky if you want to use the c port at the bottom of the screen. The attachment will block it. They say to use the android port on the side not near the quality of transfer cable and the one the controller comes with is too short. Have no idea where to find an androidcable 6″ long.
  2. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    Seems like a study light weight holder – too bad it will not work with the crystal sky if you want to use the c port at the bottom of the screen. The attachment will block it. They say to use the android port on the side not near the quality of transfer cable and the one the controller comes with is too short. Have no idea where to find an androidcable 6″ long.
  3. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    This works perfect with my dji mavic 2 pro remote. It’s strong and seems durable so far. It folds down pretty nice too.
    1. This works perfect with my dji mavic 2 pro remote. It’s strong and seems durable so far. It folds down pretty nice too.
  4. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    Some of the reviews of this stand aren’t very complimentary, but i decided to take a chance on it anyway. The aluminum base is beautifully crafted, the pivoting arms are sturdy and have plenty of friction to retain their position, and even the plastic bracket that grips the phone or pad is strong and well made. It wasn’t clear in the description, but the bracket has two sides, one for smaller phone sized devices, the other for larger things like ipads, so it works with a wide variety of devices. The instructions that came with it are well illustrated, but the pamphlet is small making it difficult to read. But the only real assembly is to attach the plastic bracket to the top of the pivoting arm, which is the focus of many complaints. I was unable to get the little screw tight enough to keep the bracket from twisting when i only used my fingers to tighten it. So i took it out into the shop, found a rather large screwdriver that fit the slot, and dabbed a little thread locker on the screw before trying again. This time, the bracket was held tightly in place and hasn’t moved since. I bought this stand to use with an apple ipad mini 4 that i keep inside a griffin survivor all-terrain case, and the combo works perfectly together. I was worried that the bracket wouldn’t hold tightly enough, or wouldn’t spread far enough, to accommodate the case, but neither is a concern.
  5. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    Some of the reviews of this stand aren’t very complimentary, but i decided to take a chance on it anyway. The aluminum base is beautifully crafted, the pivoting arms are sturdy and have plenty of friction to retain their position, and even the plastic bracket that grips the phone or pad is strong and well made. It wasn’t clear in the description, but the bracket has two sides, one for smaller phone sized devices, the other for larger things like ipads, so it works with a wide variety of devices. The instructions that came with it are well illustrated, but the pamphlet is small making it difficult to read. But the only real assembly is to attach the plastic bracket to the top of the pivoting arm, which is the focus of many complaints. I was unable to get the little screw tight enough to keep the bracket from twisting when i only used my fingers to tighten it. So i took it out into the shop, found a rather large screwdriver that fit the slot, and dabbed a little thread locker on the screw before trying again. This time, the bracket was held tightly in place and hasn’t moved since. I bought this stand to use with an apple ipad mini 4 that i keep inside a griffin survivor all-terrain case, and the combo works perfectly together. I was worried that the bracket wouldn’t hold tightly enough, or wouldn’t spread far enough, to accommodate the case, but neither is a concern.
    1. Perfect for my spark drone and ipad mini. Adjustable for both myself and my husband’s viewing preference. I actually turn the ipad holder part upside down because i like the viewing angle much lower than “right side up”. My husband however prefers a more vertical orientation so adjusts it accordingly. Easy to adjust, an absolutely perfect tablet holder for the drone. On the downside, one of the strap clips slipped the spring so suggest that you check the clips with each use just in case it fails. Another suggestion is that you pay the extra and order the prime version from this same seller unless you don’t care how fast the delivery is.
  6. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    Perfect for my spark drone and ipad mini. Adjustable for both myself and my husband’s viewing preference. I actually turn the ipad holder part upside down because i like the viewing angle much lower than “right side up”. My husband however prefers a more vertical orientation so adjusts it accordingly. Easy to adjust, an absolutely perfect tablet holder for the drone. On the downside, one of the strap clips slipped the spring so suggest that you check the clips with each use just in case it fails. Another suggestion is that you pay the extra and order the prime version from this same seller unless you don’t care how fast the delivery is.
  7. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    Tripod capable and holds my 8″ samsung tablet with protector cover snug. You will need longer tripod screws for mounting.
    1. Tripod capable and holds my 8″ samsung tablet with protector cover snug. You will need longer tripod screws for mounting.
  8. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    I can still use my controller perfectly. Lifting my phone up off the controller is exactly what i needed.
  9. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    I can still use my controller perfectly. Lifting my phone up off the controller is exactly what i needed.
  10. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    I like this product, for its durability. Showed it to my brother and he decided to order one.
  11. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    I like this product, for its durability. Showed it to my brother and he decided to order one.
  12. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    Setup is easy and straightforward. Folds nicely as i use this a lot when i travel and use my drones for work.
  13. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    Setup is easy and straightforward. Folds nicely as i use this a lot when i travel and use my drones for work.
  14. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    Company replace first one that had a defect quickly and swiftly.
  15. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    The device works great but you will need a longer usb to usb mini to comply for the larger ipad size.
    1. The device works great but you will need a longer usb to usb mini to comply for the larger ipad size.
      1. Super sturdy and well-built. I can use this with my full-size ipad and it holds it perfectly. It lasts something on amazon is built decently.
  16. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    Super sturdy and well-built. I can use this with my full-size ipad and it holds it perfectly. It lasts something on amazon is built decently.
  17. 5.0 out of 5 stars Works as it should and ends up being a much better product than I originally expected. says:

    This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    Works as it should and ends up being a much better product than i originally expected.
  18. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    Works as it should and ends up being a much better product than i originally expected.
  19. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    It’s good with everything but don’t hold a large ipad very tightly.
  20. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    It’s good with everything but don’t hold a large ipad very tightly.
    1. This was clunky and i do not use it. It was difficult to bend and use. I just use my cell phone which works much better.
      1. This was clunky and i do not use it. It was difficult to bend and use. I just use my cell phone which works much better.
  21. I use this product to hold a full size ipad on the controller to my mavic pro. Overall i like the mount, but there are a few things to be aware of. To begin with the way the mount is made if you’re using an ipad tablet you will not be able to see the lcd on the controller. To begin with the arm for the mount goes right up in the middle of the lcd screen. But moreover, with the ipad moved up far enough that you can see the screen, it is so unbalanced it’s always trying to get out of your hand. . When you put the screen down further where it’s better balanced and usable. You cannot see the controller at all your hands are underneath the ipad. . Feels a bit clumsy at times but it does work well. The unit compacts down nicely to fit in a cramped case. The unit is extremely sturdy made of machine aluminum.
  22. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    I use this product to hold a full size ipad on the controller to my mavic pro. Overall i like the mount, but there are a few things to be aware of. To begin with the way the mount is made if you’re using an ipad tablet you will not be able to see the lcd on the controller. To begin with the arm for the mount goes right up in the middle of the lcd screen. But moreover, with the ipad moved up far enough that you can see the screen, it is so unbalanced it’s always trying to get out of your hand. . When you put the screen down further where it’s better balanced and usable. You cannot see the controller at all your hands are underneath the ipad. . Feels a bit clumsy at times but it does work well. The unit compacts down nicely to fit in a cramped case. The unit is extremely sturdy made of machine aluminum.
  23. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    My first purchase of any kind of mount and i’m glad i went with the aluminium red. At first, i thought the joints were locked in. But after mounting the ipad to it, it became clear why the joints were as stiff as they were. I think tightening the nut is better than tightening from the bolt, just saying.I found it easier to place the top of the ipad on the mount first and let the ipad push up on the spring until the bottom of the ipad is seated. This help minimize over extending the spring. I can still adjust the ipad (forward or back) as needed to balance it the way i want it prior to flying. The tools and the extra caps it comes with is a bonus. The lanyard feel soft and comfortable. I’ve used futaba and spektrum rc controllers in the past and controlling drones in fpv is totally a new rush.
    1. My first purchase of any kind of mount and i’m glad i went with the aluminium red. At first, i thought the joints were locked in. But after mounting the ipad to it, it became clear why the joints were as stiff as they were. I think tightening the nut is better than tightening from the bolt, just saying.I found it easier to place the top of the ipad on the mount first and let the ipad push up on the spring until the bottom of the ipad is seated. This help minimize over extending the spring. I can still adjust the ipad (forward or back) as needed to balance it the way i want it prior to flying. The tools and the extra caps it comes with is a bonus. The lanyard feel soft and comfortable. I’ve used futaba and spektrum rc controllers in the past and controlling drones in fpv is totally a new rush.
      1. I want to like this but based on the being able to mount on a tripod. To be fair, you could with just the crystalsky bracket but there are cheaper options for just that one piece. All the holes that are with this mount are the same like most others. If you a little bit more cash, get a mavmount.
  24. I want to like this but based on the being able to mount on a tripod. To be fair, you could with just the crystalsky bracket but there are cheaper options for just that one piece. All the holes that are with this mount are the same like most others. If you a little bit more cash, get a mavmount.
  25. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    Looks and fits great but need a connector from my iphone 6 to reach the controller. I could only fin 1’ connectors on amazon that would leave too much slack.
    1. Looks and fits great but need a connector from my iphone 6 to reach the controller. I could only fin 1’ connectors on amazon that would leave too much slack.
  26. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    I found this to be unusable because i either have to hunker down on the screws so much that it is no longer flexible or the screws will loosen and the tablet will flop around.
    1. I found this to be unusable because i either have to hunker down on the screws so much that it is no longer flexible or the screws will loosen and the tablet will flop around.
      1. I bought this tablet stand for my kids. Kids were watching the ipads too close and i wanted them to sit further away when they use the ipads to watch youtube. This stand is very sturdy and has good weight. The joints are very strong and requires a lot of force to bend. The stand holds its position very well. It comes with a neck strap for gaming. I like that it folds neatly when not in use.
  27. This review is from : Aluminum Foldable Tablet Stand Holder Extender Remote Controller Holder with Lanyard Support Crystal Sky Monitor Compatible for DJI Mavic Air/Mavic Pro/Mavic 2 / Zoom/Mini/Spark Remote Controller

    I bought this tablet stand for my kids. Kids were watching the ipads too close and i wanted them to sit further away when they use the ipads to watch youtube. This stand is very sturdy and has good weight. The joints are very strong and requires a lot of force to bend. The stand holds its position very well. It comes with a neck strap for gaming. I like that it folds neatly when not in use.

Comments are closed.